2 weeks ago
Hi,
I cannot connect a client to Netbackup 10.4.
I installed Client Software on Windows, and even with that I cannot connect with my master server.
When I add a client it does not detect OS, so I need to specify manually. I do it, however, when I browser the pathname or directory that I want to make a backup it says " cannot connect on socket(25), Can not connect to Remote Service:[bpcd-NBU-WIN01].
Can someone help me?
Tks advanced.
Solved! Go to Solution.
2 weeks ago
Check the following registry entry for your client,
HKEY_LOCAL_MACHINE\SOFTWARE\VERITAS\NetBackup\CurrentVersion\Config
There will be a SERVER entry there. Confirm that your master server is listed there and make sure the master is the very first entry in that list.
The error you are getting is when a server tries to communicate with a client but is not in the client's server list.
2 weeks ago - last edited 2 weeks ago
During client setup the master server send a certificate to the client.
is this step completed successfully or fail but you just press continue?
Try to telnet or use an equivalent command the port 1556 from the one system the other ( master to client and client to master)
If this test fail you have network connectivity problem.
2 weeks ago
2 weeks ago
you need to provide more information?
is netbackup master server installed, on windows or linux?
is your netbackup master server is your media server as well?
are you able to reach client from master server by IP/hostname and vice verse?
as it was mentioned in the above, port 1556 must be enabled on master/media/client.
please do run below commands to verify?(provide details if you dont know how to verify)
from client"
<netbackup installationfolder>\veritas\netbackup\bin\bpclntcmd -self
<netbackup installationfolder>\veritas\netbackup\bin\Bpclntcmd -hn <NAME_MASTER>
<netbackup installationfolder>\veritas\netbackup\bin\Bpclntcmd -ip <IP_MASTER>
<netbackup installationfolder>\veritas\netbackup\bin\bpclntcmd -pn -verbose
from master server, if windows:
<netbackup installationfolder>\veritas\netbackup\bin\admincmd\bptestbpcd -client <clientname> -verbose
or if master is linux based:
/usr/openv/netbackup/bin/admincmd/bptestbpcd -client <clientname> -verbose
if all ok, you may reinstall the certificate, on client side
<netbackup installationfolder>\veritas\netbackup\bin\nbcertcmd -getCACertificate -server <masterservername>
<installation_path>\bin\nbcertcmd -getCertificate -server <masterservername> -force
if it did not work, you need to use a token (from java/webui)
<installation_path>\bin\nbcertcmd -getCertificate -server <masterservername> -force -token
2 weeks ago
Hi,
When I ran that following command:
NetBackup installationfolder>\veritas\netbackup\bin\admincmd\bptestbpcd -client <clientname> -verbose
windows said that the host is not authorized.
2 weeks ago
Yep, all installation was completed successfully.
I tried a telnet connection and it worked normally.
2 weeks ago
Check the following registry entry for your client,
HKEY_LOCAL_MACHINE\SOFTWARE\VERITAS\NetBackup\CurrentVersion\Config
There will be a SERVER entry there. Confirm that your master server is listed there and make sure the master is the very first entry in that list.
The error you are getting is when a server tries to communicate with a client but is not in the client's server list.
2 weeks ago
the server is listed as you can see below
2 weeks ago
On the master side, I verified the same thing and I noticed that Client_Name was listed wrong, the client hostname was with the master hostname.
I changed and restarted the master and it did work.
I appreciate your support.