Forum Discussion

Riadh_R17's avatar
Riadh_R17
Level 4
3 years ago

Replication status: paused due to network disconnection

Hello all :)

We found that replication isnt working (Replication status: paused due to network disconnection)

root@cgb2 # vradmin -g datadg repstatus datarvg
Replicated Data Set: datarvg
Primary:
Host name: cdd-cgb1_vvr
RVG name: datarvg
DG name: datadg
RVG state: enabled for I/O
Data volumes: 13
VSets: 0
SRL name: srllog
SRL size: 256.00 G
Total secondaries: 1
Secondary:
Host name: cdd-cgb2_vvr
RVG name: datarvg
DG name: datadg
Data status: consistent, behind
Replication status: paused due to network disconnection
Current mode: asynchronous
Logging to: SRL ( 41196365 Kbytes behind, 15 % full )
Timestamp Information: behind by 24h 23m 7s

We tried resync but we got an error

root@cdd-cgb2 # vradmin -g datadg resync datarvg
Message from Primary:
VxVM VVR vradmin ERROR V-5-52-493 Cannot perform the operation: none of the Secondaries is in DCM logging mode.

We Stopped vradmin on secondary then on primary and started them but always the same problem.

We checked services : services are up

Ports are the default : heartbeat: 4145
vradmind: 8199
vxrsyncd: 8989
data: Anonymous-Ports

We checked connection between the primary and secondary on both directions by their names and with these ports -> the connections are ok

Here below the /var/adm/messages of the secondary node

Nov 30 11:31:28 cdd-cgb2 vxio: [ID 162003 kern.warning] WARNING: VxVM VVR vxio V-5-0-206 listen server port in use (4145)
Nov 30 11:31:38 cdd-cgb2 vxio: [ID 430977 kern.warning] WARNING: VxVM VVR vxio V-5-0-1983 Failed to start udp heartbeat server,volnm_sync_netiod: 0, ret: 0
Nov 30 11:31:48 cdd-cgb2 vxio: [ID 162003 kern.warning] WARNING: VxVM VVR vxio V-5-0-206 listen server port in use (4145)
Nov 30 11:31:58 cdd-cgb2 vxio: [ID 430977 kern.warning] WARNING: VxVM VVR vxio V-5-0-1983 Failed to start udp heartbeat server,volnm_sync_netiod: 0, ret: 0
Nov 30 11:32:08 cdd-cgb2 vxio: [ID 162003 kern.warning] WARNING: VxVM VVR vxio V-5-0-206 listen server port in use (4145)
Nov 30 11:32:18 cdd-cgb2 vxio: [ID 430977 kern.warning] WARNING: VxVM VVR vxio V-5-0-1983 Failed to start udp heartbeat server,volnm_sync_netiod: 0, ret: 0
Nov 30 11:32:28 cdd-cgb2 vxio: [ID 162003 kern.warning] WARNING: VxVM VVR vxio V-5-0-206 listen server port in use (4145)
Nov 30 11:32:38 cdd-cgb2 vxio: [ID 430977 kern.warning] WARNING: VxVM VVR vxio V-5-0-1983 Failed to start udp heartbeat server,volnm_sync_netiod: 0, ret: 0
Nov 30 11:32:48 cdd-cgb2 vxio: [ID 162003 kern.warning] WARNING: VxVM VVR vxio V-5-0-206 listen server port in use (4145)
Nov 30 11:32:58 cdd-cgb2 vxio: [ID 430977 kern.warning] WARNING: VxVM VVR vxio V-5-0-1983 Failed to start udp heartbeat server,volnm_sync_netiod: 0, ret: 0
Nov 30 11:33:08 cdd-cgb2 vxio: [ID 162003 kern.warning] WARNING: VxVM VVR vxio V-5-0-206 listen server port in use (4145)
Nov 30 11:33:18 cdd-cgb2 vxio: [ID 430977 kern.warning] WARNING: VxVM VVR vxio V-5-0-1983 Failed to start udp heartbeat server,volnm_sync_netiod: 0, ret: 0
Nov 30 11:33:18 cdd-cgb2 vxio: [ID 709739 kern.warning] WARNING: VxVM VVR vxio V-5-0-1982 Can't spawn udp/tcp netiod thread. Exceeded max number of allowable attempts. Please start the serv
ice manually via /etc/init.d/vxnm-vxnetd start

We executed the command /etc/init.d/vxnm-vxnetd start but no results

Any help please 

Thank you very much in advance