Forum Discussion

TVitello's avatar
TVitello
Level 3
10 years ago

Backup Exec Deduplication Manager Service fails to start and displays the following error : Error 1 : Incorrect Function

Hello,

 

I have seen a previous post around this but no solution was posted.

 

We have a BE2014 server on Windows 2012 and had a power failure in our Data Center.

Now the DeDuplication Volume will not mount.

The main issue seems to be trying to start the Backup Exec Deduplication Manager service.

When you try and start the service, you get an Error 1 : Incorrect Function

Looking at the event viewer, an Event ID: 1 is logged with the following description

The description for Event ID 1 from source spad cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event: 

26016: SpaDB: RecoverDB failure.

 

I believe this is the postgresql db? How to I check/repair this?

We already tried to delete the Postmaster.pid file as decribed in  http://www.symantec.com/docs/TECH136974  with no luck.

Also found  http://www.symantec.com/docs/TECH212803 but have 12 weeks of retention, and do not want to lose all my backups!

 

Please help! 

 

 

2014
Backup and Recovery
Backup Exec
Error messages
Troubleshooting
Windows Server (2003-2008)
  • TVitello's avatar
    TVitello
    Level 3
    10 years ago

    Thanks for the reply lmosla, yes, i still have an events folder and the permissions look fine,

    Also no errors with chkdsk

     

  • pkh's avatar
    pkh
    Moderator
    10 years ago

    I would suggest that you log a support case with Symantec so that the engineer can take a look at this problem.  If you mess with the files in the dedup folder you might cause irreparable damage to the dedup folder.

  • VJware's avatar
    VJware
    Level 6
    10 years ago

    Would you browse to the Backup Exec directory using a cmd and run the following command -

    spoold.exe --trace

    Post / attach the output here. Thanks.

  • TVitello's avatar
    TVitello
    Level 3
    10 years ago

    Hello VJWare, Here is the trace.

    C:\Program Files\Symantec\Backup Exec>spoold.exe --trace
    Error: 67: Database: connection to database crdb at localhost:10085 failed (could not connect to server: Connection refused (0x0000274D/10061)
            Is the server running on host "localhost" and accepting
            TCP/IP connections on port 10085?
    )
    Error: 53: Database Manager: could not access storage database (connection actively refused).
    Error: 4: Failed to run database class
    Error: 4: Failed to read startup mode

     

    Thanks!

  • VJware's avatar
    VJware
    Level 6
    10 years ago

    Start the postgresql 8.3 service and confirm if port 10085 is open for use by BE or not.

  • TVitello's avatar
    TVitello
    Level 3
    10 years ago

    We can't becuase this server depends on the Backup Exec Deduplication Manager service, which won't start.

  • VJware's avatar
    VJware
    Level 6
    10 years ago

    My bad, I misread and assumed the DeDupe Engine service is not starting and that's why i had suggested to run spoold --trace.

    Would you instead run spad --trace -v and post the output here.

    Lastly, have you tried this KB - https://support.symantec.com/en_US/article.TECH159564.html

     

     

  • TVitello's avatar
    TVitello
    Level 3
    10 years ago

    Thanks,

    Here is the spad trace.

    C:\Program Files\Symantec\Backup Exec>spad --trace -v
    Info: set entire process max log size to 0
    Info: set entire process max log size to 0
    Error: 26016: SpaDB: RecoverDB failure.
    Trace: EventSystem::EventStorage::loadLimits Loading event storage limits
    Trace: EventSystem::EventStorage::loadLimits Original age limit: 0.  New age limit: 0
    Trace: EventSystem::EventStorage::loadLimits Original count limit: 10000.  New count limit: 10000
    Info: EventSystem::EventManager::newEvent Adding new event. type:1
    Info: remove old record file D:\BackupExecDeduplicationStorageFolder\databases\spa\database\eventproperties\1.
    Trace: EventSystem::EventStorage::checkLimits Checking event storage limits
    Trace: EventSystem::EventStorage::checkLimits Current event count: 223.  Storage limit: 10000
    Info: EventSystem::EventManager::newEvent Adding new event. type:4
    Info: remove old record file D:\BackupExecDeduplicationStorageFolder\databases\s
    pa\database\eventproperties\1.
    Trace: EventSystem::EventStorage::checkLimits Checking event storage limits
    Trace: EventSystem::EventStorage::checkLimits Current event count: 224.  Storage limit: 10000

    I do have the folder \BackupExecDeduplicationStorageFolder\etc as described in https://support.symantec.com/en_US/article.TECH159564.html

    Also we opened case with Symantec, hopefully they can find something!

  • VJware's avatar
    VJware
    Level 6
    10 years ago

    I have a feeling certain sub-directories are missing and hence the error. Support will be able to determine once they have a look @ your setup.