Forum Discussion

dropino's avatar
dropino
Level 3
15 years ago
Solved

Backup Exec Missing Robotic Library

Hi all, currently my company is using Backup Exec 2010 R2 running on window 2003 64bit R2 SP2, our tape library is HP MSL4048.

We have bought library expansion option as it have 2 drive. We tried to run two different job backuping different server concurrently but only 1 drive is active all the time & the second job will be queue & it show no device is available. It seem like althought i have 2 drive but only 1 drive can be active. it random use either drive for different job.. We also notice a behaviour, we don't have robotic library in the device tab. but on the install option or license, Robotic library is being checked & grey off, but on the about licensing information, we cannot locate any licensing regarding robotic library...

Anyone encounter this issue before?

 

Thanks 

2010
Backing Up
Backup and Recovery
Backup Exec
Licensing
Troubleshooting

7 Replies

Sort By
  • Kiran_Bandi's avatar
    Kiran_Bandi
    Level 6
    15 years ago

    we don't have robotic library in the device tab

    Is you operatimg system recognised the robot? It should show under medium changer devices in device manager. If it is not shown there, BE cannot recognise it.

    Regards...

  • dropino's avatar
    dropino
    Level 3
    15 years ago


     

    see the picture, on the left is the another backup server 12, on the right is the 2010R2 which is missing robotic library, the icon on the left tells it..

  • Kiran_Bandi's avatar
    Kiran_Bandi
    Level 6
    15 years ago

    Hi dropino,

    Can you please attach the screen shots directly? I couldn't see it now. It is giving some domain not registered message...

    Thanks...

  • Sush---'s avatar
    Sush---
    Level 6
    15 years ago
    You can refer to the following technote link which will redirect you to new technote. support.veritas.com/docs/255501 This technote has the screenshots about how the Robotic library should be shown in the Device manager of Windows operating system. Thanks, -Sush...
  • CraigV's avatar
    CraigV
    Moderator
    15 years ago

    First things first...that MSL is connected to a supported SCSI card, and NOT a RAID card on the server, correct? If not, that is your issue. What Windows sees, BE sees...

    If it is, then there are a couple of other things to look into:

     

    1. Download the latest DDI drivers for BE 2010 and install them. Once done, run the Device Configuration Wizard and install those drivers for the tape drives.

    2. Make sure that the LEO license is correctly entered in BE itself. There is a licensing wizard you can run to check this...

    3. Stop and disable Removable StoraGE SERVice as this causes issues with BE and the manner in which it controls the drive and robotics.

    4. Download HP Library and Tape Tools (HP LTT) and use the diagnostics it comes with to: a] update the library's firmware; b] check that there are no errors with the hardware.

     

  • dropino's avatar
    dropino
    Level 3
    15 years ago

    resolve on my own, thanks everyone for your kind advise

  • CraigV's avatar
    CraigV
    Moderator
    15 years ago

    ...and the resolution was...? It helps any future posters if they have the same issue as you did!

     

    Thanks!