Physical Volume Library Drive not found

Hi there,

Does your tape drive show up correctly in BE if you go to Devices? Have you run the Device Wizard to see if there isn't an issue with your drive?
What hardware is it? If it's an autoloader, ir should be showing the drive below the robotics. The Device Wizard does allow you to reassign the drive with the robotics if need be (Tools --> Device Wizard).
You can also check and make sure that Removable Storage isn't started up for some reason, as this causes issues.
Finally, you can:

1. RUn the driver install from within Backup Exec itself again to reapply the drivers;
2. Restart the services after scanning for hardware changes in Device Manager in Windows.

Hi,
The device is a Dell Powervault 124T.
Everything appears OK, device wizard checks out.
Looking for removable storage.

Oh and last night it wrote to Wednesday's tape and ignored Tuesday's.??  doh!!

This morning I tried enabling bar coding, ran inventory; and all slots with a tape in come up with 'incompatable storage media detected in robotic library'.

What labels are you using? What's the drive type, and what type of tapes are you using?

Drive type is LTO 64k. Tapes are LTO3.  Labels?  look like standard bar code labels to me?

Do they show LTO3 at the end, or something else? If they're incorrect for the tape type, you will get an error like above. Are they put on correctly?
Is the tape drive an LTO3 as well then?

They show L3 at the end; which I presume is the bar code suffix? The tape drive and tapes were acquired on Dell's advice so I have to assume they are correct?