Would anyone help to provide the detail procedure to perform offsite seeding for backup exec 15?
Hi All,
Currently, I have one CAS server(With enterprise option and dedupcliation option) and one MMS server(With enterprise option and dedupcliation option). I would like to perform offsite optimized duplication replication and I know that I should perform seeding to save the bandwidth. But, based on the Veritas article https://www.veritas.com/support/en_US/article.100025024, there just mention that I should backup to USB disk on MMS and transfrer to remote site and duplicate the the full backup set to deduplication storage on CAS which is not clearly for the detail procedure. So, I have failed to perform the seeding many times(Sending the USB hard disk between MMS site and CAS site many times......). So I will appreciated that if anyone can tell me more detail of the step for performing the seeding. Such as what type of storage should I configure for the USB drive? Need to share the drive with CAS? Or need to remove on MMS before transfer? Or so on........
Please help..... Thank you all.
Remark: I always fail to attach the USB hard disk confgured storage to CAS server.
are you not deleting that disk storage from MBES before joining it on CAS ?
Else
You can do the Backup on the standalone BE to USB storage. Then take the storage to DR site standalone BE, configure the USB storage there and then after inventory/catalog duplicate the sets to local dedupe folder. Later promote the BE to CAS, MBES resp. and share the dedupe storage for opt dupe.
Why i say standalone ? Because, if you have an existing CAS MBES configured and everything is setup, the device configured on MBES is saved on the CAS bedb, so when you detach the USB storage from MBES (without deleting it) and take it on CAS and try to configure it, it may say that the device is allready present.
I hope this is what you are running into. you can clarify the point about not being able to configure storage on CAS
- You can select that checkbox. This ensures that all set details would be removed from BEDB (sets would remain on disk). Then when you configure this storage on CAS then post configuration, just run Inventory and Catalog. All sets would be visible. Select the backup sets and right click (after selecting) -> duplicate ( choose dedupe as target)