Hi,
I already created a service group in the administrative network but I have to add a virtual IP in order to configure a backup network.
Using Microsoft cluster server is kinda easy because I just added another resource which depends on the virtual IP and it worked normally but using veritas cluster server I don't know how to accomplish
does anyone have ideas?
Hi,
Using MCS I have 4 NICs per node:
2 182.168.10.0/24 (administrative network)
2 10.70.92.0/24 (backup network) so virtual IP is 192.168.10.x but for a backup network I manually added another resource that is reachable only for clients for backups. This works great.
But using VCS I´m kind a lost.
Per node I need 4 nic?
How do I have to link this manually added IP adrress?
See below. You need add a NIC, whether you use 1 or 4 is up to you and your network requirement. If you want add 1, that is fine, if you want to add a team, that is fine too.
Once you've added the NIC, add the IP. Then link the resources in the JAVA GUI or via command line with
hares -link <parent> <child>
To add a VIP to any ServiceGroup that does not already ask for it, use the IP Resource. Within the ServiceGroup, add a new Resource of type IP. Then edit the IP resource group with the SG. Make it Critical if desired if you want to fail if that VIP is not responding.
Hope that helps.
Thanks for responding.
My Netbackup master server is in one network for administrative purposes but I have some clients in another network. Using MCS was pretty simple because I added manually a resource to the cluster(virtual IP for network2) and I added another NIC to every node and after making some changes in the host file it worked perfectly. Some clients resolve NetBackup using network 1 and some resolve it using network 2.
Using VCS is another world. I already added 1 extra NIC to both nodes but I´m stuck there.
