Forum Discussion

Zahid_Haseeb's avatar
Zahid_Haseeb
Moderator
13 years ago

Add/Delete Remote Cluster is not running via GUI + While Configuring Global Service Group Remote Cluster is not connecting via IP

Environment

OS = rhel6.2

SFHA = 6.0

GCO

host file is configured on machines under GCO

 

Add/Delete Remote Cluster is not running via GUI but can be done via command line "VCS error V-16-10-39"

 

 haclus -add remote_cluster_name remote_cluster_ip

 

While Configuring Global Service Group Remote Cluster is not connecting via IP

We just used Hostname instead of IP Address  "VCS WARNING V-16-10-73". See the below snap as a reference:

business continuity
Cluster Server

3 Replies

  • mikebounds's avatar
    mikebounds
    Level 6
    13 years ago

    Does it work if you use IP in GUI - it could be just that the hostname that can't be resolved.  I am not sure if the resolution happens on the cluster hosts or the client the GUI is running on, so you should check both it GUI works when using IP.  I've always used IP as even when connection is established, I have had problems  later on during the GCO wizard when using hostname.

    Mike

  • Zahid_Haseeb's avatar
    Zahid_Haseeb
    Moderator
    13 years ago

    Thanks Mike but I faced the problem and the workaround in which I succeed, I shared it. :)

    This post is just to share the insight not asking solution ;)

     

    But thanks for taking my query for giving response