infoscale operation Manager 7

Hi,

No, it means,

1) if you are single node, then you have to do it.

2) If your Management Server node is part of VCS cluster(say 2 node), and you want to provide Management server resiliency, you can configure it in HA environment. That time you need to install Management Server bits on both nodes but configure it on one node.(Please refer to guide https://sort.symantec.com/public/documents/vom/7.0/windowsandunix/productguides/html/Install_Config_Guide/ch04.htm)

 

In your case, you have to do it.

 

-Sudhir 

hi sudhir,

Please open your browser and type the following URL to configure:
https://XXXXXX:5634/
Please skip this step if you intend to use this host as a standby node for Veritas InfoScale Operations Manager Management Server HA.

 

is that mean if i m one node then not required to configure.

because i am not using a HA its just one node management server

Correcting my last comment, this doesn't seem to be case #2 I mentioned, because you were trying configuration of management sever, which is not a step which come in Management Server upgrade.

So if this is case #1, it will take few minutes to uninstall packages, install again and configure.

 

Looks like something is messed up while configuration of Database, because you have tried configuration multiple times.

 

1) If this VIOM Management Server installation a fresh one, would you mind uninstalling it and install again and configure?

For uninstallation, you need to fire just one command

rpm -e VRTSsfmh VRTSsfmcs

And then install fresh one and follow same configuration procedure mentioned above.

2) If this is upgrade of VIOM Management Server, and you dont want to lose  data of previous managed hosts, please contact support and escalate this case.

 

Hi Sudhir,

 

I restarted and got stucked here.

pg_ctl: could not open PID file "/var/opt/VRTSsfmcs/db/data/postmaster.pid": Permission denied
2015-09-08 14:46:54 [debug] 24381 setup_new_db.pl: Warning: /opt/VRTSsfmcs/config/adm/db_stop.sh 2>&1 > /dev/null

2015-09-08 14:46:54 [debug] 24381 setup_new_db.pl: /bin/rm -f /var/opt/VRTSsfmcs//db/SFMdb3.db > /dev/null 2>&1
2015-09-08 14:46:54 [debug] 24381 setup_new_db.pl: /bin/rm -f /var/opt/VRTSsfmcs//db/SFMdb3.log > /dev/null 2>&1
2015-09-08 14:46:54 [debug] 24381 setup_new_db.pl: /bin/rm -f /var/opt/VRTSsfmcs//db/SFMdb3_indx > /dev/null 2>&1
2015-09-08 14:46:54 [debug] 24381 setup_new_db.pl: /bin/rm -f /var/opt/VRTSsfmcs//db/SFMdb3_data > /dev/null 2>&1
2015-09-08 14:46:54 [debug] 24381 setup_new_db.pl: /bin/rm -f /var/opt/VRTSsfmcs//conf/*.conf > /dev/null 2>&1
2015-09-08 14:46:54 [debug] 24381 setup_new_db.pl: /bin/rm -f /var/opt/VRTSsfmcs//logs/.sqltrace.log > /dev/null 2>&1
2015-09-08 14:46:54 [debug] 24381 setup_new_db.pl: /opt/VRTSsfmcs/config/adm/db_init.sh
2015-09-08 14:46:55 [debug] 24381 setup_new_db.pl: /opt/VRTSsfmcs/config/adm/db_start.sh
getnameinfo failed
getnameinfo failed
2015-09-08 14:46:58 [debug] 24381 setup_new_db.pl: Updating SF_AUTHORIZATION TABLE
2015-09-08 14:46:58 [debug] 24381 setup_new_db.pl: chown habdbsync /var/VRTSsfmcs/config_db/auth.sql.24381
2015-09-08 14:46:58 [debug] 24381 setup_new_db.pl: /opt/VRTSsfmcs/config/adm/db_isql.sh habdbsync /var/VRTSsfmcs/config_db/auth.sql.24381
Tue Sep  8 14:46:58 GST 2015:  chown habdbsync /var/VRTSsfmcs/config_db/.sfm20_authorization.sql
Tue Sep  8 14:46:58 GST 2015:  /opt/VRTSsfmcs/config/adm/db_isql.sh DBA /var/VRTSsfmcs/config_db/.sfm20_authorization.sql
Tue Sep  8 14:46:58 GST 2015:  /bin/rm /var/VRTSsfmcs/config_db/.sfm20_authorization.sql
Tue Sep  8 14:46:58 GST 2015:  rm -f /var/VRTSsfmcs/config_db/.sfm20_authorization.sql  > /dev/null 2>&1

 

Hi,

 

It looks like you entered in "Management Server High Availability Configuration" wizard because you had ran setup for Management Server configuration before.

Thing you need to do is, remove file "/var/opt/VRTSsfmh/config.state" from Management Server Host and rerun the configuration URL.

 

-Sudhir

installed the conqurer  and it worked for me but it got stucked in configuration console. when i check it giving below error.

2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: Enter cg_main
2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: Checking input parameters
2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: grep primary /etc/default/sfm_resolv.conf > /dev/null 2>&1
2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: /etc/default/sfm_resolv.conf is valid

2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: /opt/VRTSvcs/bin/hares -display -type IP -group SFM_Services -attribute Address -localclus | grep global
2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: Warning: /opt/VRTSvcs/bin/hares -display -type IP -group SFM_Services -attribute Address -localclus | grep global

2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: /opt/VRTSvcs/bin/hares -display -type IP -group SFM_Services -attribute Address | grep localclus
2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: Warning: /opt/VRTSvcs/bin/hares -display -type IP -group SFM_Services -attribute Address | grep localclus

2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: /opt/VRTSvcs/bin/hares -display -type IPMultiNIC -group SFM_Services -attribute Address -localclus | grep global
2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: Warning: /opt/VRTSvcs/bin/hares -display -type IPMultiNIC -group SFM_Services -attribute Address -localclus | grep global

2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: /opt/VRTSvcs/bin/hares -display -type IPMultiNIC -group SFM_Services -attribute Address | grep localclus
2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: Warning: /opt/VRTSvcs/bin/hares -display -type IPMultiNIC -group SFM_Services -attribute Address | grep localclus

2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: /opt/VRTSvcs/bin/hares -display -type IPMultiNICB -group SFM_Services -attribute Address -localclus | grep global
2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: Warning: /opt/VRTSvcs/bin/hares -display -type IPMultiNICB -group SFM_Services -attribute Address -localclus | grep global

2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: /opt/VRTSvcs/bin/hares -display -type IPMultiNICB -group SFM_Services -attribute Address | grep localclus
2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: Warning: /opt/VRTSvcs/bin/hares -display -type IPMultiNICB -group SFM_Services -attribute Address | grep localclus

2015-09-08 13:13:10 [debug] 5839 cs_ha_config.pl: Unable to obtain virtual IP

 

Hi,

1) When you were trying browser from same box(that of management server), you should have set correct localhost entry in /etc/hosts. If that is not there, then  you would receive such error.

2) While you are launching it from outside of the box(giving box's IP or hostname), are you getting exact same error? or error like following

<management server ip or hostname>:5634 uses an invalid security certificate. The certificate is not trusted because it is self-signed. The certificate is only valid for root (Error code: sec_error_unknown_issuer)

If it is like above, you just need to add this exception in browser as known exception. Reason behind this exception is, we use self-signed certificates for authentication between management server and managed hosts.

same issue still persist i am facing certificate issue. how we can create the certificate.

 

Hi,

Can you try to connect using any other browser from outside the box.

Internet explorer should work fine.