Forum Discussion

RoadKill23's avatar
RoadKill23
Level 2
10 years ago

Disk Pool used Capacity sizes are different between two devices that replicates to one another

In my environment we have to netbackup appliances in to different locations where on replicates to the other. The issue is that all the other metrics match between the two appliances pure disk and Advanced Disk but pure disk disk pool used capacity does not have the same number and it should. Server 22 used pure Disk capactity is 38,318.494.13 MB and the percentage disk pool usage is 75.92, now with server 24 the pureDisk disk pool used capacity is 33,863,213.09 MB and the Percentage of the disk pool used is 67.09 but they both have hav a disk pool usable size of 50,471,198,73.  We contacted netbackup and they did not find any orphan images. now running a images on disk report. 

 

I also uploaded a copy of the disk pool capacity report,

 

If Anyone have any useful information I would greatly appreciate it,

 

Thanks in advance 

Backing Up
Backup and Recovery
Managing Backup Devices
NetBackup Appliance
Troubleshooting
Windows Server (2003-2008)
  • VJware's avatar
    VJware
    Level 6
    10 years ago

    Pls repost your query under the NBU Appliances forum - https://www-secure.symantec.com/connect/backup-and-recovery/forums/netbackup-appliance

    Thanks.

  • RiaanBadenhorst's avatar
    RiaanBadenhorst
    Level 6
    10 years ago

    Please run bpimmedia on each pool and compare the result to ensure you've not got more/different content on either appliance/pool.

  • tunix2k's avatar
    tunix2k
    Level 5
    10 years ago

    We had the same situation and no explanation. We found some orphaned images and cleared them. But this does not solve the problem since this images was on the appliance with lower usage.

    Since upgrade from 7.5 to 7.6 the problem is gone.

    If there no orphaned images it could be that there are orphaned Blocks.

     

    So please post.

    Netbackup Version

    result of images comparsion

    dedup rate of both appliances

    Regarding to your screenshot you are using AIR. Im right ? Only one appliance as source but both as target. its confusing. Do you have other appliances are involved?

     

    Regards

    Martin