Failed to Start File System Check on /dev/mapper/system-log during Boot up

Question

Good afternoon,I upgraded my NetBackup 5250 from 10.0 to 10.3 and after rebooting the system I am running into this issue:&nbsp;Failed to Start File System Check on /dev/mapper/system-log.Then sends the appliance into emergency mode and only able to input "journalctl"&nbsp;Does anyone have any ideas on how to fix this issue. Thank you for any help.

kiyan · Answer

the base OS is RHEL so if it is going in emergency mode it means something is broken (like a mount point).
if you have active support involve them, if you do not have active support, take a look at below article:

https://www.veritas.com/support/en_US/article.100055210

Forum Discussion

Failed to Start File System Check on /dev/mapper/system-log during Boot up

1 Reply

Related Content

Notification that /dev/mapper/system-log is at 89% full

VM backup failing with (11) system call failed

Backup are failing with 11 error(System Call failed)

Backup VMWARE fail system call failed(11)

Failed to install EAT on system