Forum Discussion
- SymTerryLevel 6
Hello,
TECH155063 might apply to this. It sounds like something is hapening at the hyper v level maybe. Could you reply with the detailed status of the failed job?
EDIT:
Also try looking for any status codes relating to Hyper V in NetBackup. Refer to the chart in HOWTO44966.
- jafferaliLevel 3
Hi SymTerry,
Please find the log below. But now the status code is different.
3/19/2014 11:01:10 AM - Info bpbrm(pid=2346) MCTTESTWIN7-PC.domainxxx.grp is the host to backup data from
3/19/2014 11:01:10 AM - Info bpbrm(pid=2346) reading file list from client
3/19/2014 11:01:11 AM - Info bpbrm(pid=2346) starting bpbkar on client
3/19/2014 11:01:11 AM - Info bpbkar(pid=22436) Backup started
3/19/2014 11:01:11 AM - Info bpbrm(pid=2346) bptm pid: 2347
3/19/2014 11:01:11 AM - Info bpbkar(pid=22436) CONTINUE BACKUP received.
3/19/2014 11:01:11 AM - Info bptm(pid=2347) start
3/19/2014 11:01:12 AM - Info bptm(pid=2347) using 262144 data buffer size
3/19/2014 11:01:12 AM - Info bptm(pid=2347) using 16 data buffers
3/19/2014 11:01:12 AM - Info bptm(pid=2347) USING 262144 data buffer size for FT
3/19/2014 11:01:14 AM - Info bptm(pid=2347) start backup
3/19/2014 11:06:17 AM - Error bptm(pid=2347) media manager terminated by parent process
3/19/2014 11:06:24 AM - Info mwwnbu04(pid=2347) StorageServer=PureDisk:mwwnbu04; Report=PDDO Stats for (mwwnbu04): scanned: 2 KB, CR sent: 0 KB, CR sent over FC: 0 KB, dedup: 100.0%
3/19/2014 11:06:24 AM - Error bpbrm(pid=2346) could not send server status message
3/19/2014 11:06:25 AM - Info bpbkar(pid=0) done
3/19/2014 11:06:25 AM - Info bpbkar(pid=0) done. status: 10: allocation failed
3/19/2014 11:08:04 AM - Info nbjm(pid=4596) starting backup job (jobid=1614682) for client MCTTESTWIN7-PC.domainxxx.grp, policy test4, schedule test
3/19/2014 11:08:04 AM - estimated 31422856 Kbytes needed
3/19/2014 11:08:04 AM - Info nbjm(pid=4596) started backup (backupid=MCTTESTWIN7-PC.domainxxx.grp_1395198484) job for client MCTTESTWIN7-PC.domainxxx.grp, policy test4, schedule test on storage unit stu_disk_mwwnbu04
3/19/2014 11:08:05 AM - started process bpbrm (2346)
3/19/2014 11:08:11 AM - connecting
3/19/2014 11:08:12 AM - connected; connect time: 00:00:01
3/19/2014 11:08:14 AM - Opening Fibre Transport Connection, Backup Id: MCTTESTWIN7-PC.domainxxx.grp_1395198484
3/19/2014 11:08:16 AM - begin writing
3/19/2014 11:13:26 AM - end writing; write time: 00:05:10
allocation failed(10)Thanks,
Jaffer
- jafferaliLevel 3
Did anyone encounter this ?
- Mark_SolutionsLevel 6
I think you may be getting things confused here...
You Hyper-V machines you seem to have set up to use Fibre Transport (the true meaning of the term within NetBackup)
But the clients within hyper-v will backup over the SAN but will not use Fibre Transport - so if you have set up FT ports on the appliance they will not work for SAN transport of virtual machine backups
Fibre Transport and SAN transport backup of virtual machines are not the same thing
Hope that makes sense!
Related Content
- 4 years ago
- 11 years ago
- 10 years ago
- 5 years ago