Forum Discussion
- davidmolineLevel 6
Hi Tabriz
Have a look in the /opt directory - there should be a sub directory relating to the megaraid (which IIRC) is the raid controller on the 5230.
The software can interrogte the controller for this and other information.
Addiitonally, during POST, it is possible to drop into the RAID controller setup and view the battery properties there.
I have no specifics on how to achieve the above, but a google search should give you the information you need.
David
- quebekModerator
Hello
I would went into CLISH
hostname.Monitor> Hardware ShowHealth
or specifically
hostname.Monitor> Hardware ShowHealth Appliance Adapter
Compute Node hostname
Time Monitoring Ran: Thu Jul 28 2022 04:48:30 CDT
+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
| Adapters and Cachevault Information |
|+-----------+-------------------------------------------+----------------+-------------------+--------------+-------------+-------------+--------------------------+--------------------------+-------+ |
|| ID | Adapter Model | Adapter Status | Cachevault Status | Rebuild Rate | Capacitance | Pack Energy | ROC Temperature(Celsius) | Battery Pack Temperature | State | |
|+-----------+-------------------------------------------+----------------+-------------------+--------------+-------------+-------------+--------------------------+--------------------------+-------+ |
|| Adapter 0 | Intel(R) Integrated RAID Module RMS3HC080 | Optimal | N/A | 50% | N/A | N/A | - | N/A | OK | |
|+-----------+-------------------------------------------+----------------+-------------------+--------------+-------------+-------------+--------------------------+--------------------------+-------+ |
|| Adapter 1 | Intel(R) RAID Controller RSP3MD088F | Optimal | Optimal | 50% | 100 % | 319 J | - | 25 C | OK | |
|+-----------+-------------------------------------------+----------------+-------------------+--------------+-------------+-------------+--------------------------+--------------------------+-------+ |
| |
+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+- TabrizLevel 5
Dear quebek
After write the Hardware ShowHealth Appliance Adapter the below optpusts appeared
----+
| Adapters and BBU Information |
|+----+--------------------------------------------+----------------+------------+----------------+------------------------+--------+-----------------+---------+-------------+--------------------+-------+ |
|| ID | Adapter model | Adapter Status | BBU Status | Rebuild Rate % | BBU Learn Cycle active | Charge | Charging Status | Voltage | Temperature | Manufacturing Date | State | |
|+----+--------------------------------------------+----------------+------------+----------------+------------------------+--------+-----------------+---------+-------------+--------------------+-------+ |
|| - | Intel(R) Integrated RAID Module RMS25CB080 | OK | OK | 100 | No | 352 | None | 9832 | 29 | 2015-10-24 | OK | |
|+----+--------------------------------------------+----------------+------------+----------------+------------------------+--------+-----------------+---------+-------------+--------------------+-------+ |
| |
+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
~
~
- TabrizLevel 5
Related Content
- 3 years ago