Adding barcode label to unknown volumes

You need to match the optical barcode label with the magnetic label netbackup has assigned to them.

You will run into trouble if you use barcode B00000 to a tape where the magnetic label is A00000.

Update: Too late ...

You cannot stick a barcode on the tape without knowing what the internal label is.

You will need to put the tapes in the robot (preferably specific slots), then run a physical inventory to get to know automated/internal label.

You can then eject the tapes one by one, add a label, and then update the volume config as follows: 

vmchange -barcode <barcode> -m <media_id>

See this similar discussion: https://www-secure.symantec.com/connect/forums/adding-barcode-labels-tapes-already-used-netbackup

Please refer to this post .

https://www-secure.symantec.com/connect/forums/adding-barcode-labels-tapes-already-used-netbackup

Eric

As per the link in my post above.....

Yes,as  Marianne suggested you need to eject the tapes one by one and add label.

recently we have  seen similar kind of issue in one of our environment.

To re-label:

Right click the tape.

Choose lable

you need to un check the verify media label before performing operation option.

if you dont perform above step you will get below error:

odd "incorrect media found in drive index" error.

Plz do this only once after all images on the tape have expired.so validate it before you perform this and go ahead.

Media can only be re-labeled once all images have expired.

Please see discussion as per the link in my 1st reply.

Thank you Marianne,got u..we have actually expired the data (Test environment) and relabeled it.

All our volumes are having 7yrs retention. So our intention is not to relabel them. Just to identify the volumes quickly in case of restores.

Is it possible to add barcode label to these volumes...If we add barcode label to these volumes and move them into library, will NetBackup be able to recognize these volumes ? Can someone help me with detailed steps..

My 1st reply above answers this question.

You will have Media Id A00015 with Barcode XYZ123L4 that NBU will recognize when moved back into the library.

Just a pity that ashokk stopped responding, leaving this thread unresolved....