Post output of below commands.
Run on Master /usr/openv/netbackup/bin/admincmd/ ./bptestbpcd -client SAPCJDV -debug -verbose
Run on Client /usr/openv/netbackup/bin/ ./bpclntcmd -self
i will also suggest you to update host file on Master / Media & Clients as shown below
192.168.2.100 SERVER01 SERVER01.mydomain.com
If your master server name is configured as the backup name, then bpclntcmd -pn will try to use the backup name/ip.
You would either need to hack your host file to make it think that:
sun107-nb is the public IP.
Or you can try the REQUIRE_INTERFACE setting which controls all outbound communications from the machine you set it on.
http://www.symantec.com/docs/HOWTO33232
https://www-secure.symantec.com/connect/forums/how-do-you-configure-requiredinterface-windows
Post output of below commands.
Run on Master /usr/openv/netbackup/bin/admincmd/ ./bptestbpcd -client SAPCJDV -debug -verbose
Run on Client /usr/openv/netbackup/bin/ ./bpclntcmd -self
i will also suggest you to update host file on Master / Media & Clients as shown below
192.168.2.100 SERVER01 SERVER01.mydomain.com
