Hello, i'm having issues moving tapes from the "netbackup" volume pool to a our customised volume pool called "offsite". Apparently tapes cannot be moved with vaild images on them, when running a "image on tape" report there are valid images on them which don't expire until 2016. Here is my problem, i cannot find any images on this tape via the catalog, when selecting "action\ duplicate, verify or import" from the catalog search. Could someone give ideas as to what i may be doing wrong? I was hoping to import these images off to another tape. Thanks

Just to recap - tell me if I understand you correctly: You ran 'images on tape' (which is the same as bpimmedia) - the result was a list of images expiring in 2010. This report queries the image database. If you cannot find the images in the Catalog section of the GUI, it means that there is something wrong with the criteria that you have specified. This action queries the same database (images) as the report. It is sometimes easier to use command line than the GUI. Have a look at bpduplicate in the Commands manual. Something like: bpduplicate -dstunit <destination_stu> -dp <destination pool name> -id <media_id> -L <output_file>

Change volume pool

NavA
Level 4
15 years ago
try bpimmedia to list images of a tape. [Note: this command can take a while], also you might want to pipe it to a text file.
bpimmedia -mediaid <media>

http://seer.entsupport.symantec.com/docs/281319.htm

And you can duplicate data to another tape using bpduplicate command.
rjrumfelt
Level 6
15 years ago
but it has tripped me up in the past.

Have you verified that the date range for when the backup occured was correct when you are searching the catalog? The default only looks back 24 hours, so you have to change it to the window from when the backup you are looking for occured.
J_H_Is_gone
Level 6
15 years ago
run the report images on tape - and just put in the tape number,
it will come back and tell you what images are on that tape
Will_Restore
Level 6
15 years ago
If that doesn't do it, try modifiying Copies (i.e. Copy 2)
Will_Restore
Level 6
15 years ago
Technically, you would duplicate those images, not import them. ;)

But if you're going to do that, why not just use another volume for your offsite pool since you're "robbing Peter to pay Paul" so to speak.
cus
Level 4
15 years ago
Thanks for your reply, i was hoping i had only entered the dates incorrectly. I did a search from as far back as 2007 for copy 1, copy 2 etc, but unfortunately i still received 'no entries' from the search.
cus
Level 4
15 years ago
unfortunately this is were it becomes confusing, when i run "images on tape" the report displays all the valid images on tape however when i go into the 'Catalog' and search there to duplicate, the tape does not exist. It is really unsual and confusing. I'm beginning to think we may have discrepancies in our Catalog.
NavA
Level 4
15 years ago

did you try this command
bpimmedia -mediaid <media>

If it is a catalog consistency issue then you may want to work with SYmante on NBCC [if included in your support contract].
rjrumfelt
Level 6
15 years ago
you have images on a tape that were expired in the catalog. What is the expiration date of the images from the "images on media" report?

Would it be possible to try an do an import of the tape to get them back into the catalog? Or does the images on tape report pull its data from the catalog? If that is the case then ignore my first statement.
Marianne
Level 6
15 years ago
Just to recap - tell me if I understand you correctly:
You ran 'images on tape' (which is the same as bpimmedia) - the result was a list of images expiring in 2010.
This report queries the image database.
If you cannot find the images in the Catalog section of the GUI, it means that there is something wrong with the criteria that you have specified. This action queries the same database (images) as the report.
It is sometimes easier to use command line than the GUI. Have a look at bpduplicate in the Commands manual.
Something like:
bpduplicate -dstunit <destination_stu> -dp <destination pool name> -id <media_id> -L <output_file>