Forum Discussion

solomοn's avatar
solomοn
Level 3
2 years ago

Flex MSDP Pool

hello guys ,

on Flex there is a path "/mnt/msdp/vol0"

when i expand MSDP storage on Flex i give the last 4TB on that MSDP , but the extra space is not on that vol0 but on vol1

is that normal? because now i dont have enough space for my backups , looks like i cant use that extra 4TB from vol1

thanks in advanced

  • open a case to support.

    There is a problem with the expansion of MSDP on Flex (at least on some Flex versions). You have to run an msdp command, but I don't remember which

    • solomοn's avatar
      solomοn
      Level 3

      okay , thanks my friend

      i will inform you when finished

  • Hi solomοn 

    What you are seeing is normal behaviour - there is some intelligence in how storage is allocate when you expand MSDP etc. 

    The second volume (vol1) should be part of the MSDP - have you checked in the UI to verify that the total size of the pool in is showing as the additional 4 TB. NetBackup (or more precisely the storage server on the Flex instance) will manage allocating data between the various volumes that make up the pool. 

    Cheers
    David

    • solomοn's avatar
      solomοn
      Level 3

      on total yes its okay

      the problem here is that im running out of space (until i get a new shelf) so i give that extra space
      but it looks like backups cant use that extra space 

      running the crcontrol --dsstat the available space is still the same was before i do the changes

  • /usr/openv/pdde/pdcr/bin/crcontrol --dsaddpartition /msdp/vol1

    is that the command you talk about ?

    StefanosM 

    • davidmoline's avatar
      davidmoline
      Level 6

      Hi solomοn 

      That would be the command if you were adding a new mount point to a BYO MDSP.

      You should be able to check if the partition is in use using the "crcontrol --dsstat 2" option - this should show all mount points. If the new 4 TB partition doesn't appear, I'd go with StefanosM and log a support case as it may not be as simple as simply adding the new mount point due to the nature of the instance (persistant data and non-persistant data). 

      Cheers
      David

  • Unfortunately, I do not remember.
    It was one of the cases where I did not keep notes.

  • hi davidmoline  and StefanosM  , we open a case and the problem resolve
    here is what we did through engineer instructions

    at first we run this command to see the mount points
    #sudo /usr/openv/pdde/pdcr/bin/crcontrol --dsstat 2 | grep -A1 "= Mount point"
    as was only 1 mount point we run the next commands to fix the issue

    Here are the exact commands to run once in the Flex Appliance Clish.

    1. Run this command prior to adding (note the size):# /usr/openv/pdde/pdcr/bin/crcontrol --dsstat
      2. To add the partition:# sudo -u msdpsvc /usr/openv/pdde/pdcr/bin/crcontrol --dsaddpartition /mnt/msdp/vol1
      3. To confirm it's showing correct size (same command as #1):
      # /usr/openv/pdde/pdcr/bin/crcontrol –dsstat
  • that's good.

    Just to be accurate, these commands were run at the storage server command line (witch is inside flex appliance) and not at Flex Clish.