Forum Discussion

Mark_M's avatar
Mark_M
Level 4
20 years ago

frozen media

Hi at all,
I have this problem. When I make a backup full of my fileserver, often a media come in frozen state with error thai I report below.
I have thinked that media are consumed and so I have changed all media. But the media that go in frozen state is new...

12/23/2005 5:37:38 PM - started process bpbrm (2508)
12/23/2005 5:37:38 PM - connecting
12/23/2005 5:37:38 PM - connected; connect time: 00:00:00
12/23/2005 5:38:24 PM - mounted
12/23/2005 5:38:30 PM - positioning DP459S to file 137
12/23/2005 5:43:44 PM - Error bptm(pid=2316) ioctl (MTWEOF) failed on media id DP459S, drive index 0, Data error (cyclic redundancy check). (23) (bptm.c.19832)
12/23/2005 5:43:44 PM - Error bptm(pid=2316) FROZE media id DP459S, could not write tape mark to begin new image
12/23/2005 5:43:45 PM - mounting DX036S

Someone know the solution?

Thank's at all and best wish at veritas newsgroup!!!

Andrews

5 Replies

  • Mark,


    Are you using the same drive when this error occurs?

    Is the Drive in a DOWN state?

    If it is do you have to bring it UP?

    Is this a new drive?

    If not how old is it?

    Have you cleaned the drive?

    Have you tryed the backup job on another drive?
  • oh yeah if you ant to use the tapes that were FROZEN by the bad tape drive you can un-freeze by running this.

    #unfreEzzz em
    /usr/openv/netbackup/bin/admincmd/bpmedia -ev $TAPE_NAME -unfreeze

    J
  • Hi,

    MTWEOF - write end of file record

    1) Check your drive firmware to see if it is compatible to VERITAS
    2) Try to use VERITAS drivers. If you are using the VERITAS driver and it causes you this issue now, change it to the manufacturer driver.
    3) Clean your drive

    patrickkuah
  • DOCUMENTATION: How to troubleshoot frozen media on UNIX and Windows
    http://seer.support.veritas.com/docs/249632.htm
  • Not to beat a dead horse, but I would run a cleaning job on it and then if it still fails with the same error on multiple media, then call the manufacturer and replace the drive.