I have assign 132 gb lun from stoarge. and mounted it.
Eg: /dev/dsk/c0t0d0s0 mounted on /mnt ----132GB
Now i want to take raw disk back.
Kindly suggest for taking back up.
You just specify the raw device in the file selection in the policy.
For example.
/devices/pci@1e,600000/pci@0/pci@9/pci@0/scsi@1/sd@0,0:d
Have you checked the Admin Guide for this , it is all explained in there.
Martin
You just specify the raw device in the file selection in the policy.
For example.
/devices/pci@1e,600000/pci@0/pci@9/pci@0/scsi@1/sd@0,0:d
Have you checked the Admin Guide for this , it is all explained in there.
Martin
I have taken backup using physical path as mentioned above:
/devices/pci@1e,600000/pci@0/pci@9/pci@0/scsi@1/sd@0,0:d
But could you assist me how to restore the raw backup.
Yes we will help you but need few more info about existing environment.
what NBU version on master server
as u said -- "132 gb lun from stoarge. and mounted it."
is that lun mounted on VM or physical H/W ?? also let us know what OS on this ??
Raw Restore is also documented in Admin Guide I. under the topic 'UNIX raw partitions':
To restore the raw partition, make sure that a device file exists. Also, the partition where the table is restored must be large enough or the results of the restore are unpredictable.
