Forum Discussion
- quebekModerator
hello
First question you have to ask your self is if your master/media server is able to see tape device on OS level side.
So what is the answer to this one? If OS will not see tape drives how come NBU should have?!?!
so use this command from NBU:
/usr/openv/volmgr/bin/scan
to see if it will find any drives & robots...
If not take this with SAN and OS admins - maybe there are issues after this upgrade with zonning...
- FalconDigitalLevel 3
If I get your point, then we run command tpconfig -dl and saw some of the drives have been with status down. we run the commands for all down drives like
vmoprcmd -upbyname IBM.ULT3580-TD3.004
and all such drives have been shown up which were mostly TD3.XXX.
Some how Backup Job have been still failing. Please advise next with commands.
- quebekModerator
hi
well nope you did not get my point....
show me the outcome of this command ran as root:
/usr/openv/volmgr/bin/scan
and maybe
/usr/openv/volmgr/bin/tpautoconf -report_disc
- FalconDigitalLevel 3
Thanks. Your commands output is awaited. However, we have received below the latest logs for backup jobs.
01/11/2023 15:07:31 - Info nbjm (pid=10289260) starting backup job (jobid=42220) for client iibapp3, policy Maximo_IIBAPP3_logs_6Months_Weekly, schedule Maximo_IIBAPP3_logs_6Months_Weekly
01/11/2023 15:07:31 - Info nbjm (pid=10289260) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=42220, request id:{C2F648AE-9197-11ED-A489-3CDFEEC20000})
01/11/2023 15:07:31 - requesting resource nbuserver-hcart-robot-tld-0
01/11/2023 15:07:31 - requesting resource nbuserver.NBU_CLIENT.MAXJOBS.iibapp3
01/11/2023 15:07:31 - requesting resource nbuserver.NBU_POLICY.MAXJOBS.Maximo_IIBAPP3_logs_6Months_Weekly
01/11/2023 15:07:31 - awaiting resource nbuserver-hcart-robot-tld-0. Waiting for resources.
Reason: Robotic library is down on server, Media server: nbuserver,
Robot Type(Number): TLD(0), Media ID: N/A, Drive Name: N/A,
Volume Pool: Maximo_pool, Storage Unit: nbuserver-hcart-robot-tld-0, Drive Scan Host: N/A,
Disk Pool: N/A, Disk Volume: N/A
- FalconDigitalLevel 3
Hi,
Thanks much for all your support.
I have attached both commands output. Need support.
- quebekModerator
So, as you can see from the report_disc outcome there are missing drives, robot.
I would have deleted all devices and ran again the device wizard...
Good luck....
- FalconDigitalLevel 3
Thanks again. So you mean to say that other than 4 robots and identified drives shown in scan command output , still some drives and robot is missing.
how can i delete and run again the drives using command line.- quebekModerator
Hey
Well I did notice that something is missing - I do not know you environment what should be there etc...
I am away from my env - so just recalling from top of my memory
tpconfig is the command to play with the devices...
but I would have used JAVA GUI to delete and run wizard...
Related Content
- 8 years ago
- 8 months ago
- 2 years ago
- 3 months ago