Forum Discussion

EvenHornfelt's avatar
3 years ago
Solved

"Manual AIR" (cmd-line) from BYO MSDP to Flex MSDP... anyone?

AIR between 9.1.0.1 BYO mediaserver attached to Flex primaryserver -> FlexAppliance 2.1.3/NBU 9.1.0.1.  Trying to "initiate manual" AIR, as Article.100009391, Status 174, 191. Detailed: Target sts server xxxxx does not have an lsu that could be a replication target. - Backup SLP and Import SLPs using same MSDP's runs ok during scheduled backup.  

  • EvenHornfelt's avatar
    EvenHornfelt
    3 years ago

    Working! - the storage server names are case sensitive, of course. (TargetName.no) 

  • Had you configured the Air properly?
    Had you config a regular AIR (SLP) and test it?

    On the flex, you use worm storage or just deduplication on the media server.

  • Not worm, "Backup SLP and Import SLPs using same MSDP's runs ok during scheduled backup" ...

    This is working fine in LAB, on Virtual FlexAppliance (2.1) NBU 9.1.0.1, Not between 2x phys... support.

    • EvenHornfelt's avatar
      EvenHornfelt
      Level 4

      Working! - the storage server names are case sensitive, of course. (TargetName.no)