Solved
Netback 7.5 -> 7.6 Solaris 10 x86 client upgrade failure
Hi.
I'm having an issue upgrading one (of 64) Solaris 10 x86 non-global zones.
The client installation fails with the error:
ERROR: The pbx_exchange daemon is not currently running. It must
be started before NetBackup installation can be continued.
Aborting ...
Manually running the start script indicates PBX is starting:
/opt/VRTSpbx/bin/vxpbx_exchanged start Started Symantec Private Branch Exchange
I've done some searching and read a couple of other similar threads. There are no other PBX processes running and nothing currently listening on port 1556. The PBX logs shows the following errors:
2,50936,103,103,1,1394719308518,6001,1,0:,108:ACE_Service_Config directive: "static PBX_Manager ' -debuglevel 10 -authuser root -outside 1556 -insecure '",0:,0,(0|) 2,50936,103,103,2,1394719308520,6001,1,0:,44:PBX_Manager::open, searching all interfaces.,0:,0,(0|) 2,50936,103,103,3,1394719308520,6001,1,0:,44:PBX_Manager::open, internal endpoint failed.,0:,2,(0|) 2,50936,103,103,4,1394719308521,6001,1,0:,0:,0:,2,(1|)
Which seems to indicate some sort of a network issue, but I'm not sure what.
I've attached the truss output from pbx_exchange. The last few lines show:
open("/etc/vx/VxICS/VxPBX.cfg", O_RDONLY) = 3
fstat(3, 0xFFFFFD7FFFDFE2B0) = 0
fstat(3, 0xFFFFFD7FFFDFE200) = 0
ioctl(3, TCGETA, 0xFFFFFD7FFFDFE270) Err#25 ENOTTY
read(3, " [ V x P B X ] \n " I n".., 512) = 114
read(3, 0x004911E4, 512) = 0
lseek(3, 0, SEEK_CUR) = 114
close(3) = 0
sigaction(SIGPIPE, 0xFFFFFD7FFFDFF910, 0xFFFFFD7FFFDFFA00) = 0
fork1() = 8388
lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF]
mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, 4294967295, 0) = 0xFFFFFD7FFDDE0000
lseek(1, 0, SEEK_CUR) = 181285
lseek(2, 0, SEEK_CUR) = 181319
lseek(2, 0, SEEK_CUR) = 181353
lseek(1, 0, SEEK_CUR) = 181387
lseek(2, 0, SEEK_CUR) = 181421
lseek(2, 0, SEEK_CUR) = 181455
I'm not sure if the Err#25 EONTTY is a problem.
ENOTTY The fildes argument is not associated with a
STREAMS device that accepts control func-
tions.
Any ideas?
Thanks,
Chris.
PBX_Manager::open, internal endpoint failed.,0:,2,(0|)
this technote for HP environment, couldn't hurt to check the details
http://www.symantec.com/business/support/index?page=content&id=TECH170314
