NETBACKUP 4.5 connection problems
im using netbackup 4.5 under solaris 9 platform and when i changed a bad drive i started have this issue
after that i cant send any job, because i lose the conection with the library, and netbackup is just showing like its looking for media
thanks for the help
Alejandro
The Screendump is too small to see anything.
You are losing connectivity to the library?
Please do the following to start NBU Media Management daemons in verbose mode:
vi /usr/openv/volmgr/vm.conf
(add this line:)
VERBOSE
Stop/start NBU.
You will see hardware related logs in /var/adm/messages.
If connection to the robot is lost, you might need to double-check physical hardware connectivity - cables, terminators, Fibre/SCSI bridge (whatever connection method is used). There might be a SCSI cable that wasn't properly tightened when drive was replaced or even pins that got bent.
I'd be interested to see entries in /var/adm/messages.
