Forum Discussion

zairil's avatar
zairil
Level 3
5 years ago
Solved

Netbackup AIR - Replication Network Interface

Hi All,

My netbackup has 2 interface 10.2.2.xx and 10.2.185.xx. How Can I force the image replication to use 10.2.185.xx instead of using 10.2.2.xx?. Now when I do image replication it will go through 10.2.2.xx. 

Thanks in advance.

8.1.2
Linux
  • davidmoline's avatar
    davidmoline
    5 years ago

    HI zairil 

    The interface used for replication (or any NetBackup operation for that matter) is really controlled by the host OS routing and not NetBackup - there are some exceptions to this but let's ignore that for now.

    To make your replication use the second interface you will probably have to either add a network route for the DR site's network range via that interface. Talk to your network guys on what might be required.

    Regards
    David

  • Tape_Archived's avatar
    Tape_Archived
    Moderator
    5 years ago

    zairil where are you replicating the images?? Does that host have two interfaces in the same IP range?

    On the host where you are replicating, you can update the host file and map the 10.2.855.xx ip to your primary Netbackup. Try this and the secondary host will use the IP that you want to communicate & AIR, understand that even netbackup communication will happen over this IP hence forward. This is one of the easiest solutions that I can think of right away.

    • zairil's avatar
      zairil
      Level 3
      5 years ago

      Tape_Archived , I replicating images to another netbackup server at DR site. I use two interface with different IP range, 

      first interface : 10.2.2.xxx (management purpose interface)

      Second interface : 10.2.85.xxx ( for replication interface)

      for this AIR setup where I can file the setting from admin GUI and appliance web UI?

      • davidmoline's avatar
        davidmoline
        Level 6
        5 years ago

        HI zairil 

        The interface used for replication (or any NetBackup operation for that matter) is really controlled by the host OS routing and not NetBackup - there are some exceptions to this but let's ignore that for now.

        To make your replication use the second interface you will probably have to either add a network route for the DR site's network range via that interface. Talk to your network guys on what might be required.

        Regards
        David