Forum Discussion

cyberninja's avatar
cyberninja
Level 6
11 years ago

Netbackup can't see robot erorr 202

Hello,

I'm trying to add a 2nd tape libary, a Oracle SL150. I doing this on to two different networks. The GUI can see Robotic Path but not the Robot Control Host. The Robet also shows up as not enabled. I'm guessing that I'm missing a setting somewhere.

Ohter info:
Drive one has a bridged connection with the SL150 libary
 

Out put of some commands I ran on the 2nd media server

sudo tpconfig -d

Id  DriveName           Type   Residence

      Drive Path                                                       Status

****************************************************************************

0   HP.ULTRIUM5-SCSI.008 hcart3 TLD(1)  DRIVE=5

      /dev/rmt/4cbn                                                    DOWN

1   HP.ULTRIUM5-SCSI.009 hcart3 TLD(1)  DRIVE=1

      /dev/rmt/5cbn                                                    DOWN

2   HP.ULTRIUM5-SCSI.010 hcart3 TLD(1)  DRIVE=6

      /dev/rmt/2cbn                                                    UP

3   HP.ULTRIUM5-SCSI.011 hcart3 TLD(1)  DRIVE=4

      /dev/rmt/1cbn                                                    DOWN

4   HP.ULTRIUM5-SCSI.012 hcart3 TLD(1)  DRIVE=2

      /dev/rmt/0cbn                                                    UP

5   HP.ULTRIUM5-SCSI.013 hcart3 TLD(1)  DRIVE=3

      /dev/rmt/3cbn                                                    DOWN

 

Currently defined robotics are:

  TLD(1)     robotic path = /dev/sg/c0tw500104f000d1600al1

 

EMM Server = Master-2

 

sudo tpconfig -l

Device Robot Drive       Robot                    Drive                 Device         Second

Type     Num Index  Type DrNum Status  Comment    Name                  Path           Device Path

robot      1    -    TLD    -       -  -          -                     /dev/sg/c0tw500104f000d1600al1

  drive    -    0 hcart3    5    DOWN  -          HP.ULTRIUM5-SCSI.008  /dev/rmt/4cbn

  drive    -    1 hcart3    1    DOWN  -          HP.ULTRIUM5-SCSI.009  /dev/rmt/5cbn

  drive    -    2 hcart3    6      UP  -          HP.ULTRIUM5-SCSI.010  /dev/rmt/2cbn

  drive    -    3 hcart3    4    DOWN  -          HP.ULTRIUM5-SCSI.011  /dev/rmt/1cbn

  drive    -    4 hcart3    2      UP  -          HP.ULTRIUM5-SCSI.012  /dev/rmt/0cbn

  drive    -    5 hcart3    3    DOWN  -          HP.ULTRIUM5-SCSI.013  /dev/rmt/3cbn

 

sudo tpautoconf -t

TPAC60 HP      Ultrium 5-SCSI  Y5BS HU1331WR67 -1 -1 -1 -1 /dev/rmt/4cbn - -

TPAC60 HP      Ultrium 5-SCSI  Y5BS HU1331WR4P -1 -1 -1 -1 /dev/rmt/5cbn - -

TPAC60 HP      Ultrium 5-SCSI  Y5BS HU1243RY1G -1 -1 -1 -1 /dev/rmt/2cbn - -

TPAC60 HP      Ultrium 5-SCSI  Y5BS HU1331WR5A -1 -1 -1 -1 /dev/rmt/1cbn - -

TPAC60 HP      Ultrium 5-SCSI  Y5BS HU1331WR6K -1 -1 -1 -1 /dev/rmt/0cbn - -

TPAC60 HP      Ultrium 5-SCSI  Y5BS HU1331WR65 -1 -1 -1 -1 /dev/rmt/3cbn - -

 

Any help would be great.

14 Replies