Forum Discussion

NAYAB's avatar
NAYAB
Level 4
7 years ago

Not able to setup NBU Appliance using Default IP

Hi All, 

Trying to setup NBU appliance 5240 usng the default IP 192.168.229.233, but unable to do so as i am not able to ping the IP. Is the default IP changed or is there anything i need to do ?

NBU Version 3.1

Thanks,

Nayab

  • You should be able to login on a screen attached to the VGA port. If so the CLISH> Network> Netstat command should show you if any packets have been received - if zero you have an external network issue. Alternatively try a RJ45 cable direct to a laptop which has its IP ethernet address say 192.168.229.234.

    Andrew

  • You should be able to login on a screen attached to the VGA port. If so the CLISH> Network> Netstat command should show you if any packets have been received - if zero you have an external network issue. Alternatively try a RJ45 cable direct to a laptop which has its IP ethernet address say 192.168.229.234.

    Andrew

    • NAYAB's avatar
      NAYAB
      Level 4

      It turns out to be my laptop/cable problem....