Forum Discussion

Amit_Shelke's avatar
Amit_Shelke
Level 3
13 years ago
Solved

Required NetBackup 7.5 daemons / services running on a master server

I have installed Netbackup 7.5 master and media server on two differemt machine, for which different set of services are running on respective machines.

I am not sure which are the services that are necessary to be running always for NBU master. Below is the link that is related to the NBU 6.5 version. Is there any similar KB or document available for 7.5 version.

http://www.symantec.com/business/support/index?page=content&id=TECH57455

 

similar for NBU media server 7.5 

http://www.symantec.com/business/support/index?page=content&id=TECH142421

7.5
Backup and Recovery
Documentation
Features
NetBackup
Windows 7
  • mph999's avatar
    mph999
    13 years ago

    It is difficult to describe this, as Marianne says what should be there will depend on the config.

    How about this for an idea.

    Is it working (backups / restores etc ...) 

    If yes, then what you have running is correct for your environment.

    Martin

5 Replies

  • Marianne's avatar
    Marianne
    Level 6
    13 years ago

    TECH142421 is for a 7.x media server. 

    TECH135186 is for a 7.x master server.

    NBU services on 7.5 master server are the same as for 7.0.

    Difference in services will depend on whether the master server is also a media server.
    In that case, you need to combine master and media server TN's.

    Other processes that will make a difference is the type of backup storage - disk, dedupe, tape, etc.
     

  • mph999's avatar
    mph999
    Level 6
    13 years ago

    It is difficult to describe this, as Marianne says what should be there will depend on the config.

    How about this for an idea.

    Is it working (backups / restores etc ...) 

    If yes, then what you have running is correct for your environment.

    Martin

  • Amit_Shelke's avatar
    Amit_Shelke
    Level 3
    13 years ago

    Thanks all.

    From where can I read about the feature installed for my product [NBU Master Server], so that I can ensure that whether correct services are running associated with that feature.

  • Marianne's avatar
    Marianne
    Level 6
    13 years ago

    Look at licenses installed on your Master server - 'bpminlicense -list_keys -verbose' command from cmd (in <program-files>\veritas\netbackup\bin\admincmd).

    The 'Features' in the output will tell you which features are available on the Master server.

    To know what has been configured, look at Devices section of the GUI and Storage Units that have been configured.

  • huanglao2002's avatar
    huanglao2002
    Level 6
    13 years ago

    1 you should know the role  in you netbackup domain.

    2 then record all the started service in "control panel->services"

    3 you can use monitor soft check the services status.