Forum Discussion

Harish_Ramakris's avatar
Harish_Ramakris
Level 4
13 years ago

Status Code - 636

Hello -

Currently I am running Netbackup 7.5.0.1 on Linux master connected with two media servers, and current biggest challenge is my whole Netbackup infra accommodates more than 95% of VMware backups and both media servers acts as VMware hosts.

At one point backup fails at Status 636, below are few steps which I tried to troubleshoot:

* Captured Network utilization, found normal.
* Enabled Perform Monitoring and found CPU utilization also Normal.

Symantec is recommending to upgrade to 7.5.0.3, how much is this feasible and is there any other steps which I am missing here.

Looking forward for Solution

7.5
Agent for VMware Virtual Infrastructure
Agents
Backing Up
Backup and Recovery
Banking & Finance
Error messages
Linux
NetBackup
Tip-How to
  • Harish_Ramakris's avatar
    Harish_Ramakris
    Level 4
    13 years ago

    Hello Mark -

    Netbackup was successfully upgraded to 7.5.0.3 with all the recomended EEB, backups are still continuing to fail with status "636".

    Any solution is much appreciated.

    Thanks

  • Marianne's avatar
    Marianne
    Level 6
    13 years ago

    Are you performing synthetic backups?
    Please tell us more about policy config?

    Explanation of Status 636:

     

    Message: read from input socket failed
    Explanation: The read from an input socket failed. The underlying connection
    has been broken.
    RecommendedAction: The bpsynth process encountered an error while reading
    from an input socket. The socket may be between bpsynth and bptm or bpdm.
    The errno that was logged to the NetBackup error log indicates the reason for the
    failure. For more information, refer to the following: the debug log for bpsynth
    (on the master server) and for the bptm or the bpdm reader or writer processes (on
    the media server). Check the network connectivity between the master and the
    media server. Rerun the synthetic backup job. If the problem persists, contact
    customer support and send appropriate logs.
     
    Do you have bpsynth log folder on master? And bptm on media server?
    Please rename logs to reflect process name (e.g. bptm.txt) and post as File attachments.
  • Harish_Ramakris's avatar
    Harish_Ramakris
    Level 4
    13 years ago

    Are you performing synthetic backups?
    No it's not a Synthetic backup.


    Please tell us more about policy config?
    It's a VMware backup and Media server is VMware backup host.

    I am facing issue with only one media server currently, as per my observation there are many "bpfis and bpbrm" which is occupying to much of CPU utilization.

    I am not sure why this two service will be still active while I have zero Jobs Active/Queued.

  • Karthikeyan_Sun's avatar
    Karthikeyan_Sun
    Level 6
    13 years ago

    you mentioned you had issue with both media servers, in last post it came down to one? anything on that? where that upgrade done ? on both media servers?

  • Harish_Ramakris's avatar
    Harish_Ramakris
    Level 4
    13 years ago

    Yes earilier this issue was persisting on both media servers, now it has come down to one server, both the media servers were upgraded to 7.5.0.3

  • Karthikeyan_Sun's avatar
    Karthikeyan_Sun
    Level 6
    13 years ago

    I just did a quick check on this error code on web, all i see this is nothing related to vmware host backup. Was there anything done on media server to get work? how about going for an recyle of nbu daemon on that problematic media server? also check in job detail status which process is making this error code and get us that process logs.