Forum Discussion

KaForce's avatar
KaForce
Level 2
13 years ago
Solved

Breaking mirrored volume with active I/O

Hi All,

I have been using VSF for a while to accommodate data migrations with great success. I am about to break all of the recent mirrors I created to migrate from one array to another. The only thing I want to do this time is do the break while there is active I/O. In particular, Exchange 2003. I am of the opinion that the I/0 will continue to write to the new array once I pull away the volume associated with the old array.

 

Any gotchas I should be aware of?

  • This should work fine - adding a mirror to new array and then dropping mirror on old array is common place for migrating to new array whilst application is online.

    You may have some small DCM or DCO objects which are small bitmaps to help syncing mirrors, but I imagine if you do, these will be removed automatically when you remove mirror - if not, then you can just remove these unless you have any remaining mirrors (if you have 2 new arrays or you mirror within array using SFW).

    Mike

  • This should work fine - adding a mirror to new array and then dropping mirror on old array is common place for migrating to new array whilst application is online.

    You may have some small DCM or DCO objects which are small bitmaps to help syncing mirrors, but I imagine if you do, these will be removed automatically when you remove mirror - if not, then you can just remove these unless you have any remaining mirrors (if you have 2 new arrays or you mirror within array using SFW).

    Mike