VVR - Data status inconsistent - DCM (autosync)
Hi!
I’ve configured VVR 5.1_SP1RP4 (Veritas Storage Foundation) on a RHEL 5.9 server.
I’ve started yesterday the replication and today (19 hours later) the state of Data Status still is Inconsistent.
It’s only 1 RVG of 1000 GB.
Looks like never ends Autosync, network looks fine, I've copy files between the two hosts and time was normal.
I saw that Readback in PROD server is always filled up. I've increased to 256M and still filled up, looks like never flush!
[root @ latlap-prd4917 ~]
# vxmemstat
Fri 12 Dec 2014 06:38:47 PM BRST
Pool DG Min Max In Allocated Max Waiting
Size Size Use Used
---------- ------- -------- ---------- ---------- ---------- --------- -------
Voliomem - 1024 131072 0 1024 0 no
NMCOM-latambpmvvr_rvg vvrdg01 1024 16384 0 1024 0 no
RViomem - 1024 131072 0 1024 0 no
Readback - 1024 262144 236080 236576 236080 no
Other - 1024 131072 0 1024 0 no
Source server: latlap-prd4917
Replica server: latlap-cob4917
# vxdisk list
DEVICE TYPE DISK GROUP STATUS
sda auto:none - - online invalid
sdb auto:cdsdisk vvrdisk01 vvrdg01 online
sdc auto:cdsdisk vvrdisk02 vvrdg01 online
sdd auto:none - - online invalid
# vxprint -Pl
Disk group: vvrdg01
Rlink: rlk_latlap-cob4917_latambpmvvr
info: timeout=500 rid=0.1068
latency_high_mark=10000 latency_low_mark=9950
bandwidth_limit=none
state: state=ACTIVE
synchronous=off latencyprot=off srlprot=autodcm
assoc: rvg=latambpmvvr_rvg
remote_host=latlap-cob4917 IP_addr=153.40.227.102 port=4145
remote_dg=vvrdg01
remote_dg_dgid=1418321601.11.latlap-cob4917
remote_rvg_version=30
remote_rlink=rlk_latlap-prd4917_latambpmvvr
remote_rlink_rid=0.1065
local_host=latlap-prd4917 IP_addr=144.215.151.70 port=4145
protocol: TCP/IP
flags: write enabled attached inconsistent cant_sync connected asynchronous autosync resync_started
[root @ latlap-prd4917 ~]
# df -h
Filesystem Size Used Avail Use% Mounted on
[…]
/dev/vx/dsk/vvrdg01/latambpmvvr 1000G 536M 938G 1% /latambpm/vvr
[root @ latlap-prd4917 ~]
# vradmin -g vvrdg01 -l repstatus latambpmvvr_rvg
Replicated Data Set: latambpmvvr_rvg
Primary:
Host name: latlap-prd4917
RVG name: latambpmvvr_rvg
DG name: vvrdg01
RVG state: enabled for I/O
Data volumes: 1
VSets: 0
SRL name: latambpmvvr_srl
SRL size: 200.00 G
Total secondaries: 1
Secondary:
Host name: l atlap-cob4917
RVG name: latambpmvvr_rvg
DG name: vvrdg01
Rlink from Primary: rlk_latlap-cob4917_latambpmvvr
Rlink to Primary: rlk_latlap-prd4917_latambpmvvr
Configured mode: asynchronous
Latency protection: off
SRL protection: autodcm
Data status: inconsistent
Replication status: resync in progress (autosync)
Current mode: asynchronous
Logging to: DCM (contains 996786176 Kbytes) (autosync)
Timestamp Information: N/A
Bandwidth Limit: N/A
[root @ latlap-prd4917 ~]
# vxrlink -g vvrdg01 -T status rlk_latlap-cob4917_latambpmvvr
Fri 12 Dec 2014 11:26:20 AM BRST
VxVM VVR vxrlink INFO V-5-1-4464 Rlink rlk_latlap-cob4917_latambpmvvr is in AUTOSYNC. 996797440 Kbytes remaining.
VxVM VVR vxrlink INFO V-5-1-9472 Timestamp is not available when rlink is using DCM
# date
Fri Dec 12 11:29:28 BRST 2014
# vradmin -g vvrdg01 -l repstatus latambpmvvr_rvg
Logging to: DCM (contains 996645888 Kbytes) (autosync)
# date
Fri Dec 12 11:29:34 BRST 2014
Logging to: DCM (contains 996641792 Kbytes) (autosync)
# date
Fri Dec 12 11:29:39 BRST 2014
Logging to: DCM (contains 996637696 Kbytes) (autosync)
# date
Fri Dec 12 11:29:48 BRST 2014
Logging to: DCM (contains 996631552 Kbytes) (autosync)
# date
Fri Dec 12 11:31:19 BRST 2014
Logging to: DCM (contains 996558848 Kbytes) (autosync)
Thanks a lot for any clue about the issue.
MaC.