Forum Discussion

Bill_Ranck's avatar
Bill_Ranck
Level 4
14 years ago

vxconfigd not starting on reboot

I have Volume Manager 4.1 running on a Solaris 10 with Sun Cluster.  This is a 2 node cluster and one node is fine, however on the second node vxconfigd fails to start on reboot.  The odd part is that vxconfigd starts and works fine if I manually start it once the system has booted up.

The Oracle/Sun support folks have suggested re-installing Veritas, and I've located some install disks so I'm ready to try that, but I'm wondering if there is anything else I can try first? 

business continuity
Oracle RAC
Solaris
Storage Foundation
Troubleshooting
  • Bill_Ranck's avatar
    Bill_Ranck
    14 years ago

    I had already checked for the presence of the install-db file, and it did not exist.  And, there were no errors on startup except ones that said vxconfigd was not running.  Nothing from vxconfigd itself.

    Oracle/Sun had suggested installing a patch 124358-08 which I was finally able to download and after installing this patch vxconfigd started correctly.  This may not have been a patch issue in particular, but just replaced whatever file or binary was broken.

    At least I did not have to re-install VxVM. 

    Thanks for the suggestions . . .

  • Gaurav_S's avatar
    Gaurav_S
    Moderator
    14 years ago

    is there a file called /etc/vx/reconfig.d/state.d/install-db ?

    if install-db file exists, it will prevent volume manager to startup ..

     

    remove the file & volume manager should start automatically..

     

    Gaurav

  • Marianne's avatar
    Marianne
    Level 6
    14 years ago

    Agree with Gaurav.  Any error messages at boot time?

    See http://www.symantec.com/docs/TECH69680

  • Bill_Ranck's avatar
    Bill_Ranck
    Level 4
    14 years ago

    I had already checked for the presence of the install-db file, and it did not exist.  And, there were no errors on startup except ones that said vxconfigd was not running.  Nothing from vxconfigd itself.

    Oracle/Sun had suggested installing a patch 124358-08 which I was finally able to download and after installing this patch vxconfigd started correctly.  This may not have been a patch issue in particular, but just replaced whatever file or binary was broken.

    At least I did not have to re-install VxVM. 

    Thanks for the suggestions . . .