VxVM vxconfigd ERROR V-5-1-8561 ddl_fill_dmp_info:

Hi community,

Recently there was a project to add a new EMC AX4-5 enclosure on top of the existing AX4-5 Enclosure (a new array of disks).

Current cluster is a 6 blade cluster where all blades share the same LUNs (partitions) using VCSFS and PowerPath.

After adding the new LUNs and then running on the master blade of the cluster and scanning the devices (devfsadm -Cv) then the following error was encountered:

# vxdctl enable
VxVM vxdctl ERROR V-5-1-307 vxconfigd is not running, cannot enable

# vxconfigd -k
VxVM vxconfigd ERROR V-5-1-8561 ddl_fill_dmp_info: Path 0x4080280 not found in devlist: Error 0
VxVM vxconfigd ERROR V-5-1-1589 enable failed: System error occurred in the client
    Error 0; aborting

Veritas also creates a core dump file, Here is the pstack output:

# pstack core
core 'core' of 64:    vxconfigd -x syslog -m boot
 fed656ba strcmp   (84215b0, bcddc5c) + 10a
 08120aaf dmp_getpathindex (8047b3c, 84215b0, 9fb5000) + 77
 08120492 dmp_countenclr_lun (8047b3c, 804729a, 9fb5000) + 72
 0811f6d3 dmp_dumpenclr (8047b3c, 9fc0408, 9fb5000) + fb
 0811f586 dmp_append (8047b3c, 9fc0408, 0, 2710, 9fb5000) + 12a
 0811f120 config_dmpdump (8883110, 9fc0408, 3e000000) + 1d8
 081259f0 config_all (8883110, 3e000000, 1) + 57c
 08125397 req_dg_getconfig_all (8883110, 82bec48) + 3f
 0812f55b request_loop (8047e68, 8047de8, feffb818, 1, feffb818, 3b80000) + 76b
 0810a2fc main     (5, 8047e2c, 8047e44) + b74
 080771d2 ???????? (5, 8047ed0, 8047eda, 8047edd, 8047ee4, 8047ee7)

Engine log:

2011/12/08 09:31:27 VCS ERROR V-16-10001-1004 CVMVxconfigd:???:monitor:Core file saved once already
2011/12/08 09:31:28 VCS INFO V-16-2-13001  Resource(cvm_vxconfigd): Output of the completed operation (monitor)
/core: ELF 32-bit LSB core file 80386 Version 1, from 'vxconfigd'

Any ideas ?

P.S. All logical paths are shown active by running "powermt display dev=all" towards the EMC array.

Thanks,

Florin.