2013R2_11.1.4.55331 SRD Network Issue
Hello,
I have created a new SRD for 2013R2_11.1.4.55331. It was created on Windows 10 Pro with the Windows 10 ADK installed and the Advanced option was used for the creation.
Everytime I boot from this new SRD a window pops up that no Network adaptor was found. However, when running IPConfig from the SRD the following is returned:
Windows IP Configuration Host Name . . . . . . . . . . . . : minint-27f29vt Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : home.gateway Ethernet adapter Ethernet: Connection-specific DNS Suffix . : home.gateway Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-04-88-93 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::fc70:8f7f:2365:7123%2(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.11(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Monday, February 1, 2016 2:01:37 PM Lease Expires . . . . . . . . . . : Tuesday, February 2, 2016 2:02:56 PM Default Gateway . . . . . . . . . : 192.168.1.254 DHCP Server . . . . . . . . . . . : 192.168.1.254 DHCPv6 IAID . . . . . . . . . . . : 33561981 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1E-40-98-01-00-1D-7D-04-88-93 DNS Servers . . . . . . . . . . . : 192.168.1.254 NetBIOS over Tcpip. . . . . . . . : Enabled
So obviously a Network adaptor was found and configured correctly.
But when I try to map a network drive I get the following error "A specified logon session does not exist. It may already have been terminated. The device I'm trying to map to is a Synology NAS running DSM 5.2-5644 Update 2 running the Windows File Service.
I have another SRD that was created on Windows 8.1 using 2013R2_11.1.0.53728. This disk has no problems identifying the network adaptor and no problems mapping drives from the NAS.
This error is 100% repeatable (and I have verified I'm using the correct userid/password for connection to the NAS) and I have tried the SRD on different PCs. Obviously I want to use the newer SRD as I need support for Windows 10.
Thanks