Forum Discussion

SteveG144's avatar
SteveG144
Level 3
8 years ago

Error EndCreateSnapshotSet (-2147212529) when running backup

I have been fighting with this for about a month now.  Any backup that tries to run, will fail with this error.  I've tried defragging the hard drives (all are under 10%) and have restarted the server.  I've changed the VSS settings on each drive to allow for unlimited storage area.

Nothing has helped.  

Does anyone have a solution to get this error to go away??  This is running SSR 2013 R2 on a Windows SBS 2011 server.

Thanks.

    • SteveG144's avatar
      SteveG144
      Level 3

      I set the Storage Area Maximum Size to no limit.

      • Markus_Koestler's avatar
        Markus_Koestler
        Moderator

        Sorry for beeing not specific enough, i meant the VSS options in the backup job.

  • SteveG144

    Which volumes are you trying to backup? Check each volume and confirm how much free space there is.

    If the server has a system reserved partition, please exclude this (just as a test) to see if it allows the backup to complete.

    • SteveG144's avatar
      SteveG144
      Level 3

      It does have a system reserved partition and it does appear to run when I unselect that partition.  So, what can be done to repair/include the system reserved partition?

      The backup HAD been working fine with the reserved partition included recently.

      • criley's avatar
        criley
        Moderator

        SteveG144

        OK, so at least we have narrowed down the problem to that partition..

        Can you go to \Program Files\Symantec\Symantec System Recovery\Utility and run the following from a command prompt (run as admin): SmeDump.exe

        This will produce a file called debug.txt in the same folder. Please attach that here and I will take a look.