/opt/MegaRAID/MegaCli/MegaCli64 -EncInfo -aAll


n5220uk:/home/maintenance # /opt/MegaRAID/MegaCli/MegaCli64 -EncInfo -aAll

Number of enclosures on adapter 0 -- 2

Enclosure 0:
Device ID : 252
Number of Slots : 8
Number of Power Supplies : 0
Number of Fans : 0
Number of Temperature Sensors : 0
Number of Alarms : 0
Number of SIM Modules : 1
Number of Physical Drives : 0
Status : Normal
Position : Unavailable
Connector Name : Unavailable
Partner Device Id : 65535

Inquiry data :
Vendor Identification : LSI
Product Identification : SGPIO
Product Revision Level : N/A
Vendor Specific :

Enclosure 1:
Device ID : 24
Number of Slots : 16
Number of Power Supplies : 2
Number of Fans : 4
Number of Temperature Sensors : 10
Number of Alarms : 0
Number of SIM Modules : 2
Number of Physical Drives : 16
Status : Normal
Position : 1
Connector Name : Port B
Partner Device Id : 65535

Inquiry data :
Vendor Identification : Promise
Product Identification : J630s
Product Revision Level : 060=
Vendor Specific : TB002B103176 0000

Number of Voltage Sensors :6

Voltage Sensor :0
Voltage Sensor Status :OK
Voltage Value :1170 milli volts

Voltage Sensor :1
Voltage Sensor Status :OK
Voltage Value :980 milli volts

Voltage Sensor :2
Voltage Sensor Status :OK
Voltage Value :3220 milli volts

Voltage Sensor :3
Voltage Sensor Status :OK
Voltage Value :1170 milli volts

Voltage Sensor :4
Voltage Sensor Status :OK
Voltage Value :970 milli volts

Voltage Sensor :5
Voltage Sensor Status :OK
Voltage Value :3220 milli volts

Number of enclosures on adapter 1 -- 1

Enclosure 0:
Device ID : 0
Number of Slots : 8
Number of Power Supplies : 2
Number of Fans : 0
Number of Temperature Sensors : 1
Number of Alarms : 0
Number of SIM Modules : 0
Number of Physical Drives : 8
Status : Normal
Position : Unavailable
Connector Name : Unavailable
Partner Device Id : 65535

Inquiry data :
Vendor Identification : ESG-SHV.
Product Identification : SCA HSBP M9.....
Product Revision Level : 2.17
Vendor Specific :

Number of enclosures on adapter 2 -- 0


Exit Code: 0x00

/opt/MegaRAID/MegaCli/MegaCli64 -pdlist -a0 | grep -i "slot number":

Slot Number: 1
Slot Number: 2
Slot Number: 3
Slot Number: 4
Slot Number: 5
Slot Number: 6
Slot Number: 7
Slot Number: 8
Slot Number: 9
Slot Number: 10
Slot Number: 11
Slot Number: 12
Slot Number: 13
Slot Number: 14
Slot Number: 15
Slot Number: 16

n5220uk:/home/maintenance # /opt/MegaRAID/MegaCli/MegaCli64 -adpallinfo -aall

Adapter #0

==============================================================================
Versions
================
Product Name : Intel (R) RAID Controller RS2PI008
Serial No : SV21504201
FW Package Build: 12.12.0-0048

Mfg. Data
================
Mfg. Date : 04/09/12
Rework Date : 00/00/00
Revision No : 59A
Battery FRU : N/A

Image Versions in Flash:
================
FW Version : 2.120.63-1242
BIOS Version : 3.22.00_4.11.05.00_0x05020000
Preboot CLI Version: 04.04-017:#%00008
WebBIOS Version : 6.0-34-e_29-Rel
NVDATA Version : 2.09.03-0013
Boot Block Version : 2.02.00.00-0000
BOOT Version : 09.250.01.219

Pending Images in Flash
================
None

PCI Info
================
Vendor Id : 1000
Device Id : 0079
SubVendorId : 8086
SubDeviceId : 9280

Host Interface : PCIE

Number of Frontend Port: 0
Device Interface : PCIE

Number of Backend Port: 8
Port : Address
0 500015554e75723f
1 0000000000000000
2 0000000000000000
3 0000000000000000
4 0000000000000000
5 0000000000000000
6 0000000000000000
7 0000000000000000

HW Configuration
================
SAS Address : 500605b00493c1e0
BBU : Present
Alarm : Present
NVRAM : Present
Serial Debugger : Present
Memory : Present
Flash : Present
Memory Size : 512MB
TPM : Absent
On board Expander: Absent
Upgrade Key : Absent

Settings
================
Current Time : 23:20:19 4/4, 2023
Predictive Fail Poll Interval : 300sec
Interrupt Throttle Active Count : 16
Interrupt Throttle Completion : 50us
Rebuild Rate : 30%
PR Rate : 30%
BGI Rate : 30%
Check Consistency Rate : 30%
Reconstruction Rate : 30%
Cache Flush Interval : 4s
Max Drives to Spinup at One Time : 2
Delay Among Spinup Groups : 2s
Physical Drive Coercion Mode : 1GB
Cluster Mode : Disabled
Alarm : Enabled
Auto Rebuild : Enabled
Battery Warning : Enabled
Ecc Bucket Size : 15
Ecc Bucket Leak Rate : 1440 Minutes
Restore HotSpare on Insertion : Enabled
Expose Enclosure Devices : Disabled
Maintain PD Fail History : Disabled
Host Request Reordering : Enabled
Auto Detect BackPlane Enabled : SGPIO/i2c SEP
Load Balance Mode : Auto
Use FDE Only : No
Security Key Assigned : No
Security Key Failed : No
Security Key Not Backedup : No
Any Offline VD Cache Preserved : No
Allow Boot with Preserved Cache : No
Disable Online Controller Reset : No
PFK in NVRAM : No
Use disk activity for locate : No

Capabilities
================
RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
Supported Drives : SAS, SATA

Allowed Mixing:

Mix in Enclosure Allowed
Mix of SAS/SATA of HDD type in VD Allowed

Status
================
ECC Bucket Count : 0

Limitations
================
Max Arms Per VD : 32
Max Spans Per VD : 8
Max Arrays : 128
Max Number of VDs : 64
Max Parallel Commands : 1008
Max SGE Count : 80
Max Data Transfer Size : 8192 sectors
Max Strips PerIO : 42
Min Strip Size : 8 KB
Max Strip Size : 1.0 MB
Max Configurable CacheCade Size: 0 GB
Current Size of CacheCade : 0 GB
Current Size of FW Cache : 0 MB

Device Present
================
Virtual Drives : 0
Degraded : 0
Offline : 0
Physical Devices : 18
Disks : 16
Critical Disks : 0
Failed Disks : 0

Supported Adapter Operations
================
Rebuild Rate : Yes
CC Rate : Yes
BGI Rate : Yes
Reconstruct Rate : Yes
Patrol Read Rate : Yes
Alarm Control : Yes
Cluster Support : No
BBU : Yes
Spanning : Yes
Dedicated Hot Spare : Yes
Revertible Hot Spares : Yes
Foreign Config Import : Yes
Self Diagnostic : Yes
Allow Mixed Redundancy on Array : No
Global Hot Spares : Yes
Deny SCSI Passthrough : No
Deny SMP Passthrough : No
Deny STP Passthrough : No
Support Security : No
Snapshot Enabled : No
Support the OCE without adding drives : Yes
Support PFK : Yes
PFK TrailTime Remaining : 0 days 0 hours

Supported VD Operations
================
Read Policy : Yes
Write Policy : Yes
IO Policy : Yes
Access Policy : Yes
Disk Cache Policy : Yes
Reconstruction : Yes
Deny Locate : No
Deny CC : No
Allow Ctrl Encryption: No
Enable LDBBM : No

Supported PD Operations
================
Force Online : Yes
Force Offline : Yes
Force Rebuild : Yes
Deny Force Failed : No
Deny Force Good/Bad : No
Deny Missing Replace : No
Deny Clear : No
Deny Locate : No
Disable Copyback : No
Enable JBOD : No
Enable Copyback on SMART : No
Enable Copyback to SSD on SMART Error : Yes
Enable SSD Patrol Read : No
PR Correct Unconfigured Areas : Yes
Enable Spin Down of UnConfigured Drives : Yes
Disable Spin Down of hot spares : No
Spin Down time : 30
Error Counters
================
Memory Correctable Errors : 0
Memory Uncorrectable Errors : 0

Cluster Information
================
Cluster Permitted : No
Cluster Active : No

Default Settings
================
Phy Polarity : 0
Phy PolaritySplit : 0
Background Rate : 30
Strip Size : 256kB
Flush Time : 4 seconds
Write Policy : WB
Read Policy : Adaptive
Cache When BBU Bad : Disabled
Cached IO : No
SMART Mode : Mode 6
Alarm Disable : Yes
Coercion Mode : 1GB
ZCR Config : Unknown
Dirty LED Shows Drive Activity : No
BIOS Continue on Error : No
Spin Down Mode : None
Allowed Device Type : SAS/SATA Mix
Allow Mix in Enclosure : Yes
Allow HDD SAS/SATA Mix in VD : Yes
Allow SSD SAS/SATA Mix in VD : No
Allow HDD/SSD Mix in VD : No
Allow SATA in Cluster : No
Max Chained Enclosures : 16
Disable Ctrl-R : Yes
Enable Web BIOS : Yes
Direct PD Mapping : No
BIOS Enumerate VDs : Yes
Restore Hot Spare on Insertion : Yes
Expose Enclosure Devices : No
Maintain PD Fail History : Yes
Disable Puncturing : No
Zero Based Enclosure Enumeration : No
PreBoot CLI Enabled : Yes
LED Show Drive Activity : Yes
Cluster Disable : Yes
SAS Disable : No
Auto Detect BackPlane Enable : SGPIO/i2c SEP
Use FDE Only : No
Enable Led Header : Yes
Delay during POST : 0
EnableCrashDump : No
Disable Online Controller Reset : No
EnableLDBBM : No
Un-Certified Hard Disk Drives : Allow
Treat Single span R1E as R10 : No
Max LD per array : 16
Power Saving option : Not Defined
Default spin down time in minutes: 30
Enable JBOD : No
TTY Log In Flash : No
Time taken to detect CME : 60s
Adapter #1

==============================================================================
Versions
================
Product Name : Integrated Intel(R) RAID Controller SROMBSASMP2
Serial No :
FW Package Build: 11.0.1-0057

Mfg. Data
================
Mfg. Date : 00/00/00
Rework Date : 00/00/00
Revision No :
Battery FRU : N/A

Image Versions in Flash:
================
FW Version : 1.41.372-2527
BIOS Version : 2.07.00
WebBIOS Version : 2.2-23-e_16-Rel
Preboot CLI Version: 01.40-010:#%00008
Boot Block Version : 1.00.00.01-0012

Pending Images in Flash
================
None

PCI Info
================
Vendor Id : 1000
Device Id : 0060
SubVendorId : 8086
SubDeviceId : 3505

Host Interface : PCIE

Number of Frontend Port: 0
Device Interface : PCIE

Number of Backend Port: 8
Port : Address
0 5000c5004266858d
1 5000c50055bb890d
2 5000c500585f4281
3 5000c50055bbac95
4 5000c500625ada79
5 5000c5005682cc85
6 5000c5005666734d
7 5000c50062686409

HW Configuration
================
SAS Address : 5001e674b2db4000
BBU : Present
Alarm : Present
NVRAM : Present
Serial Debugger : Present
Memory : Present
Flash : Present
Memory Size : 512MB
TPM : Absent
On board Expander: Absent
Upgrade Key : Absent

Settings
================
Current Time : 23:20:20 4/4, 2023
Predictive Fail Poll Interval : 300sec
Interrupt Throttle Active Count : 16
Interrupt Throttle Completion : 50us
Rebuild Rate : 30%
PR Rate : 30%
BGI Rate : 30%
Check Consistency Rate : 30%
Reconstruction Rate : 30%
Cache Flush Interval : 4s
Max Drives to Spinup at One Time : 2
Delay Among Spinup Groups : 6s
Physical Drive Coercion Mode : 1GB
Cluster Mode : Disabled
Alarm : Enabled
Auto Rebuild : Enabled
Battery Warning : Enabled
Ecc Bucket Size : 15
Ecc Bucket Leak Rate : 1440 Minutes
Restore HotSpare on Insertion : Enabled
Expose Enclosure Devices : Disabled
Maintain PD Fail History : Disabled
Host Request Reordering : Enabled
Auto Detect BackPlane Enabled : SGPIO/i2c SEP
Load Balance Mode : Auto
Use FDE Only : No
Security Key Assigned : No
Security Key Failed : No
Security Key Not Backedup : No
Any Offline VD Cache Preserved : No
Allow Boot with Preserved Cache : No
Disable Online Controller Reset : No
PFK in NVRAM : No
Use disk activity for locate : No

Capabilities
================
RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
Supported Drives : SAS, SATA

Allowed Mixing:

Mix in Enclosure Allowed
Mix of SAS/SATA of HDD type in VD Allowed

Status
================
ECC Bucket Count : 0

Limitations
================
Max Arms Per VD : 32
Max Spans Per VD : 8
Max Arrays : 128
Max Number of VDs : 64
Max Parallel Commands : 1008
Max SGE Count : 80
Max Data Transfer Size : 8192 sectors
Max Strips PerIO : 42
Min Strip Size : 8 KB
Max Strip Size : 1.0 MB
Max Configurable CacheCade Size: 0 GB
Current Size of CacheCade : 0 GB
Current Size of FW Cache : 0 MB

Device Present
================
Virtual Drives : 1
Degraded : 0
Offline : 0
Physical Devices : 9
Disks : 8
Critical Disks : 0
Failed Disks : 0

Supported Adapter Operations
================
Rebuild Rate : Yes
CC Rate : Yes
BGI Rate : Yes
Reconstruct Rate : Yes
Patrol Read Rate : Yes
Alarm Control : Yes
Cluster Support : No
BBU : Yes
Spanning : Yes
Dedicated Hot Spare : Yes
Revertible Hot Spares : Yes
Foreign Config Import : Yes
Self Diagnostic : Yes
Allow Mixed Redundancy on Array : No
Global Hot Spares : Yes
Deny SCSI Passthrough : No
Deny SMP Passthrough : No
Deny STP Passthrough : No
Support Security : No
Snapshot Enabled : No
Support the OCE without adding drives : No
Support PFK : No

Supported VD Operations
================
Read Policy : Yes
Write Policy : Yes
IO Policy : Yes
Access Policy : Yes
Disk Cache Policy : Yes
Reconstruction : Yes
Deny Locate : No
Deny CC : No
Allow Ctrl Encryption: No
Enable LDBBM : No

Supported PD Operations
================
Force Online : Yes
Force Offline : Yes
Force Rebuild : Yes
Deny Force Failed : No
Deny Force Good/Bad : No
Deny Missing Replace : No
Deny Clear : No
Deny Locate : No
Disable Copyback : No
Enable JBOD : No
Enable Copyback on SMART : No
Enable Copyback to SSD on SMART Error : No
Enable SSD Patrol Read : No
PR Correct Unconfigured Areas : Yes
Enable Spin Down of UnConfigured Drives : No
Disable Spin Down of hot spares : No
Spin Down time : 0
Error Counters
================
Memory Correctable Errors : 0
Memory Uncorrectable Errors : 0

Cluster Information
================
Cluster Permitted : No
Cluster Active : No

Default Settings
================
Phy Polarity : 0
Phy PolaritySplit : 0
Background Rate : 30
Strip Size : 256kB
Flush Time : 4 seconds
Write Policy : WB
Read Policy : Adaptive
Cache When BBU Bad : Disabled
Cached IO : No
SMART Mode : Mode 6
Alarm Disable : Yes
Coercion Mode : 1GB
ZCR Config : IDSEL
Dirty LED Shows Drive Activity : No
BIOS Continue on Error : No
Spin Down Mode : None
Allowed Device Type : SAS/SATA Mix
Allow Mix in Enclosure : Yes
Allow HDD SAS/SATA Mix in VD : Yes
Allow SSD SAS/SATA Mix in VD : No
Allow HDD/SSD Mix in VD : No
Allow SATA in Cluster : No
Max Chained Enclosures : 3
Disable Ctrl-R : Yes
Enable Web BIOS : Yes
Direct PD Mapping : No
BIOS Enumerate VDs : Yes
Restore Hot Spare on Insertion : Yes
Expose Enclosure Devices : No
Maintain PD Fail History : Yes
Disable Puncturing : No
Zero Based Enclosure Enumeration : No
PreBoot CLI Enabled : Yes
LED Show Drive Activity : No
Cluster Disable : Yes
SAS Disable : No
Auto Detect BackPlane Enable : SGPIO/i2c SEP
Use FDE Only : No
Enable Led Header : Yes
Delay during POST : 0
EnableCrashDump : No
Disable Online Controller Reset : No
EnableLDBBM : No
Un-Certified Hard Disk Drives : Block
Treat Single span R1E as R10 : No
Max LD per array : 16
Power Saving option : Enable all power saving options
Default spin down time in minutes: 0
Enable JBOD : No
Adapter #2

==============================================================================
Versions
================
Product Name : Intel Embedded Server RAID Technology II
Serial No :
FW Package Build:

Mfg. Data
================
Mfg. Date : 00/00/00
Rework Date : 00/00/00
Revision No :
Battery FRU : N/A

Image Versions in Flash:
================
BIOS Version : A.10.02251631I

Pending Images in Flash
================
None

PCI Info
================
Vendor Id : 8086
Device Id : 3a25
SubVendorId : 8086
SubDeviceId : 34df

Host Interface : PCIX

Number of Frontend Port: 1
Port : Address
0 0000000000000000
Device Interface : PCIX

Number of Backend Port: 6
Port : Address
0 0000000000000000
1 0000000000000000
2 0000000000000000
3 0000000000000000
4 0000000000000000
5 0000000000000000

HW Configuration
================
SAS Address : 50ffffff00000000
BBU : Absent
Alarm : Absent
NVRAM : Absent
Serial Debugger : Absent
Memory : Absent
Flash : Absent
Memory Size : 1MB
TPM : Absent
On board Expander: Absent
Upgrade Key : Absent

Settings
================
Current Time : 23:20:20 4/4, 2023
Predictive Fail Poll Interval : 600sec
Interrupt Throttle Active Count : 0
Interrupt Throttle Completion : 0us
Rebuild Rate : 50%
PR Rate : 50%
BGI Rate : 50%
Check Consistency Rate : 50%
Reconstruction Rate : 0%
Cache Flush Interval : 0s
Max Drives to Spinup at One Time : 8
Delay Among Spinup Groups : 0s
Physical Drive Coercion Mode : 1GB
Cluster Mode : Disabled
Alarm : Disabled
Auto Rebuild : Enabled
Battery Warning : Disabled
Ecc Bucket Size : 0
Ecc Bucket Leak Rate : 0 Minutes
Restore HotSpare on Insertion : Disabled
Expose Enclosure Devices : Disabled
Maintain PD Fail History : Disabled
Host Request Reordering : Enabled
Auto Detect BackPlane Enabled : SGPIO/i2c SEP
Load Balance Mode : Auto
Use FDE Only : No
Security Key Assigned : No
Security Key Failed : No
Security Key Not Backedup : No
Any Offline VD Cache Preserved : No
Allow Boot with Preserved Cache : No
Disable Online Controller Reset : No
PFK in NVRAM : No
Use disk activity for locate : No

Capabilities
================
RAID Level Supported : RAID0, RAID1, RAID10
Supported Drives : SATA

Allowed Mixing:

Mix in Enclosure Allowed
Mix of SAS/SATA of HDD type in VD Allowed
Mix of SAS/SATA of SSD type in VD Allowed
Mix of SSD/HDD in VD Allowed

Status
================
ECC Bucket Count : 0

Limitations
================
Max Arms Per VD : 8
Max Spans Per VD : 4
Max Arrays : 8
Max Number of VDs : 8
Max Parallel Commands : 32
Max SGE Count : 63
Max Data Transfer Size : 131072 sectors
Max Strips PerIO : 1
Min Strip Size : 64 KB
Max Strip Size : 64 KB
Max Configurable CacheCade Size: 0 GB
Current Size of CacheCade : 0 GB
Current Size of FW Cache : 0 MB

Device Present
================
Virtual Drives : 1
Degraded : 0
Offline : 0
Physical Devices : 2
Disks : 2
Critical Disks : 0
Failed Disks : 0

Supported Adapter Operations
================
Rebuild Rate : Yes
CC Rate : Yes
BGI Rate : Yes
Reconstruct Rate : No
Patrol Read Rate : Yes
Alarm Control : No
Cluster Support : No
BBU : No
Spanning : Yes
Dedicated Hot Spare : No
Revertible Hot Spares : No
Foreign Config Import : No
Self Diagnostic : Yes
Allow Mixed Redundancy on Array : No
Global Hot Spares : Yes
Deny SCSI Passthrough : No
Deny SMP Passthrough : Yes
Deny STP Passthrough : Yes
Support Security : No
Snapshot Enabled : No
Support the OCE without adding drives : No
Support PFK : No

Supported VD Operations
================
Read Policy : Yes
Write Policy : Yes
IO Policy : Yes
Access Policy : Yes
Disk Cache Policy : No
Reconstruction : No
Deny Locate : No
Deny CC : No
Allow Ctrl Encryption: No
Enable LDBBM : No

Supported PD Operations
================
Force Online : Yes
Force Offline : Yes
Force Rebuild : Yes
Deny Force Failed : No
Deny Force Good/Bad : No
Deny Missing Replace : Yes
Deny Clear : Yes
Deny Locate : No
Disable Copyback : Yes
Enable JBOD : No
Enable Copyback on SMART : No
Enable Copyback to SSD on SMART Error : No
Enable SSD Patrol Read : No
PR Correct Unconfigured Areas : No
Error Counters
================
Memory Correctable Errors : 0
Memory Uncorrectable Errors : 0

Cluster Information
================
Cluster Permitted : No
Cluster Active : No

Default Settings
================
Phy Polarity : 0
Phy PolaritySplit : 0
Background Rate : 30
Strip Size : 64kB
Flush Time : 0 seconds
Write Policy : WB
Read Policy : RA
Cache When BBU Bad : Disabled
Cached IO : No
SMART Mode : Disabled
Alarm Disable : No
Coercion Mode : 1GB
ZCR Config : Unknown
Dirty LED Shows Drive Activity : Yes
BIOS Continue on Error : Yes
Spin Down Mode : None
Allowed Device Type : SATA Only
Allow Mix in Enclosure : Yes
Allow HDD SAS/SATA Mix in VD : No
Allow SSD SAS/SATA Mix in VD : No
Allow HDD/SSD Mix in VD : No
Allow SATA in Cluster : No
Max Chained Enclosures : 1
Disable Ctrl-R : No
Enable Web BIOS : No
Direct PD Mapping : Yes
BIOS Enumerate VDs : Yes
Restore Hot Spare on Insertion : No
Expose Enclosure Devices : No
Maintain PD Fail History : No
Disable Puncturing : No
Zero Based Enclosure Enumeration : No
PreBoot CLI Enabled : Yes
LED Show Drive Activity : No
Cluster Disable : No
SAS Disable : No
Auto Detect BackPlane Enable : SGPIO/i2c SEP
Use FDE Only : No
Enable Led Header : No
Delay during POST : 0
EnableCrashDump : No
Disable Online Controller Reset : No
EnableLDBBM : No
Un-Certified Hard Disk Drives : Block
Treat Single span R1E as R10 : No
Max LD per array : 16
Power Saving option : Enable all power saving options
Default spin down time in minutes: 0
Enable JBOD : No

Exit Code: 0x00
n5220uk:/home/maintenance #


/opt/MegaRAID/MegaCli/MegaCli64 -Cfgdsply -a0 | grep "RAID Level\|State\|Number Of Drives\|Slot Number\|Firmware state"

No output printed

And finally

n5220uk:/home/maintenance # /opt/MegaRAID/MegaCli/MegaCli64 -pdlist -a0 | grep -i " Enclosure Device\|slot number\|firmware state\|foreign":
Slot Number: 1
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 2
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 3
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 4
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 5
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 6
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 7
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 8
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 9
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 10
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 11
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 12
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 13
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 14
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 15
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
Slot Number: 16
Firmware state: Unconfigured(good), Spun Up
Foreign State: Foreign
Foreign Secure: Drive is not secured by a foreign lock key
n5220uk:/home/maintenance #