cancel
Showing results for 
Search instead for 
Did you mean: 

Bond updating after media server creation

acioffarelli
Level 4

Hello, on a 5250 Flex appliance, release 3.0, i've created a bond using the 4 FC/TH port available. On this bond i've tagged a vlan and then i've created a media server container using it (bond0.21).

  • bond0.21 (nic3 to nic6, 5250 appliance E i/o setup)
  • vlan tag 21
  • subnet 172.16.95.0/24
  • gateway 172.16.95.254

The customer has another requirement to be met, notified after the activities...he want to split the bond in two, 2 FC/TH ports per bond. Can i edit the bond (bond0.21) removing two ports from it and use them to create another bond, for example bond1.26, without removing/corrupting/decommissioning the existent media server container?

Thanks for your help!

2 REPLIES 2

kiyan
Level 4

@acioffarelli I do not have access to Flex version 3 but as per the documentation, you shoudl be able to modify the bond.

https://www.veritas.com/content/support/en_US/doc/130821112-157209411-0/v158027715-157209411

 

Cheers.

sanket_pathak1
Level 4

@acioffarelli 

i dont think we are allowed to modify (add/remove) interfaces from a bond in FlexOS 3.0. Not sure if its allowed in FlexOS 3.2.

Better create a support ticket and check with them.