Showing results for 
Search instead for 
Did you mean: 

Community Insights

If you've ever tried to add an image to a post on Connect you know it can be frustrating if you are forced to muddle through on your own. This article is meant to guide you through the process and, hopefully, make it a little easier. If you've ever inserted an image into the body of a gmail message then this will look a little familiar to you. So settle in and follow along. If you find this helpful you may want to bookmark this page until inserting images becomes second nature - and you start doing demos yourself...

Step 1 - Click the "Insert Image" icon - it's tiny but you can see it's a little picture of mountains with a sun

Screen Shot 2013-03-29 at 8.26.37 AM.png

Step 2 - The Flie Browser window will open - click  "Upload"

Screen Shot 2013-03-29 at 8.27.49 AM.png

Step 3 - Browse to the file on your computer and choose "Open" and then "Upload"

Screen Shot 2013-03-29 at 8.30.04 AM.png

If you wish to create thumbnall sized images at this time you can also select an alternate size by selection any one of the thumbnail sizes before clicking "Upload" - this will automatically create thumbnail sized images.

Screen Shot 2013-03-29 at 9.25.34 AM.png

Screen Shot 2013-03-29 at 8.33.26 AM.png

Step 4 - Now that your image has been successfully been uploaded you can manually resize it if you desire - remember that any image wider than 660px will run off the Connect page.

To resize your image, highlight your image and click "Resize". In the dialog box enter the desired dimensions - you can either make a copy of the original image or apply the new size directly to it - and click "Resize"

Screen Shot 2013-03-29 at 8.34.07 AM.png

Step 5 - Finally, highlight the image you want to insert into your post and click "insert" and voila! you're done!

Screen Shot 2013-03-29 at 8.35.41 AM.png

Step 6 - World domination... of course!



Just want to add a couple of things

1) the images that are upload can be re-used, i.e. you can use them on any of your subsequent posts.

2) if you need to delete any image, click on My Workspace, find it and you can delete it.  If it is used in any of your posts, the posts will now contain a broken link.  You should only delete an image from your My Workspace if it has not been used previously.


Today I met two problems with symantec server protection manager 12.1.2.On the page Monitor,

1. Monitors(monitors/Logs/view risk) => Can't see log

I can't see risk log without our notification still send email alarm for administrator about virus status.Maybe problem appear from clients log setting, some client has low memory.I'm not sure about it...

2. Date time of Alarm email send to administrator different

I recied notifications email about new risk on 11-Mar-2015 but Date time on client is 02/24/2014 18:23:00

I checked date time on server manager and client is the same today

below is picture of error, please help me resolve this problem, thank alot.

1. Can't see log (time to view : current months)


Status of memory on clients:


Clients log setting:


2. Date time of Alarm email send to administrator different