01-10-2014 11:56 AM
Hi there,
I have a doubt about if should I connect the NIC5 RMM port of my BE3600 appliance to network?
I've seen that there are some guides that explain is exclusively of Symantec technical support use, but is for remote access or onsite support?
If yes, what considerations should I know to make it work properly?
Thanks!
Have a great day
Solved! Go to Solution.
01-10-2014 11:33 PM
Hi,
It should be for Symantec to remote in. I've checked the setup guide and can't find anything in it that says you mustn't connect it, or even must connect it.
If it were me, I'd connect it as it is a management port...otherwise leave it disconnected, and if you have an issue, THEN connect it and get Symantec to help you configure it.
Thanks!
01-10-2014 11:33 PM
Hi,
It should be for Symantec to remote in. I've checked the setup guide and can't find anything in it that says you mustn't connect it, or even must connect it.
If it were me, I'd connect it as it is a management port...otherwise leave it disconnected, and if you have an issue, THEN connect it and get Symantec to help you configure it.
Thanks!
01-13-2014 08:22 AM
Thanks for your response CragV!
I will follow the recomendation.
Any other info about this I'll let you know.
Have a great day!