03-05-2014 08:26 PM
Hello
We are using BE3600.2 and what we have observed that once we enable the RDP session using powershell it allows us RDP into it. But even after rebooting the appliance device the RDP is still working. We need to know how to disable that so that it only gets activated when we supply powershell scripts. We tried to run the C:\Program Files\Symantec\BEAppliance\BEApplianceshell\DisableRemoteDesktop.exe but no luck.
Thank you
Solved! Go to Solution.
03-05-2014 10:09 PM
Hi Wiki,
Have you checked out the TN below and tried to retroactively work back from this to disable RDP?
http://www.symantec.com/docs/TECH169781
Thanks!
03-05-2014 10:09 PM
Hi Wiki,
Have you checked out the TN below and tried to retroactively work back from this to disable RDP?
http://www.symantec.com/docs/TECH169781
Thanks!
03-06-2014 11:49 PM
It worked not sure which step but I followed the article you gave and now RDP gets disabled after 3 to 10mins once we logoff the box
03-12-2014 01:38 AM
Hello Wiki , Enabling it again using same powershell commands may have resolved this issue, however we had situation once and nstalling latest patches through live updates followed by a reboot of appliance have resolved this issue for us.