01-29-2015 09:40 PM
Hi, we are planning to upgrade from BE2012 to BE2014.
We have one VM with Central Admin role and three BE3600 as Member Server Role.
Should we first upgrade CAS and then the Member Servers (appliance)? Does the 2014 CAS work w/ 2012 appliance during the transition period?
Which patch level of BE2014 should we go for? SP2 or ....??
Thanks for any advice.
Solved! Go to Solution.
01-29-2015 10:26 PM
...the primary appliance is promoted to the CASO role first and then patched before you do this on every other appliance you want to link in as an MMS.
When patching, always patch the CASO first, followed by the MMS servers. Upgrading the appliances should see you follow the TN below:
http://www.symantec.com/business/support/index?page=content&id=HOWTO100113
Thanks!
01-29-2015 09:48 PM
1. refer https://www-secure.symantec.com/connect/blogs/be2014-download-link
2. Check compatibility Guide.
3, Get a new set of license keys for BE 2014
4. Backup your Data and the Catalog folder from the backup exec installation folder .
For question related to CAS Refer http://www.symantec.com/business/support/index?page=content&id=TECH178278
You should install the all availalbe updates as good practice.
01-29-2015 10:26 PM
...the primary appliance is promoted to the CASO role first and then patched before you do this on every other appliance you want to link in as an MMS.
When patching, always patch the CASO first, followed by the MMS servers. Upgrading the appliances should see you follow the TN below:
http://www.symantec.com/business/support/index?page=content&id=HOWTO100113
Thanks!
02-02-2015 01:26 AM
Hi Joseph,
As already mentioned, the CAS must be upgraded first. It does support rolling upgrades so you do not need to upgrade all the MBES's at the same time. Remember to disable communication (in storage tab) with the MBES's when upgrading the CAS.