03-13-2012 06:47 AM
After installing SP2 for BuE 2010 R3 (downloaded from http://www.symantec.com/docs/TECH178798), SP2 still shows up for download and install through LiveUpdate. Help -> About -> Installed Updates shows Service Pack 2 so I assume it installed correctly. This isn't really a problem, just wanted to bring it to your attention. If there is any more information I can provide let me know. Thank you.
03-13-2012 07:48 PM
There was a repack of SP2. It could be that the SP2 that you installed is the original SP2 which needs to be replaced by the repack. Install the SP2 from LU and see whether SP2 appears again.
03-14-2012 07:11 AM
03-14-2012 07:25 AM
Hi,
Check the link below for the manual download page. You'd filter for your version of BE...
Thanks!
03-14-2012 09:56 AM
The only link I found for SP2 directs me to the page I linked in the OP. I redownloaded and the 32-bit installer has a different checksum from the one I have. But the 64-bit one is identical, and I had the issue with both architectures.
Edit: The 32-bit file was corrupt, hence the different checksum. So, it seems that the standalone SP2 installers are still the 'old' version.
08-15-2012 12:30 AM
Hi,
I am experiencing the same scenario since I also installed the SP2 that was downloaded from Symantec site. If you are saying that the downloaded file was the original installer and the one that we see in Live Update was the re-pack, then what are the major changes between these installers? Is there a link that will show the difference between the two SP2 installers (original vs. re-pack)
Thank You!