cancel
Showing results for 
Search instead for 
Did you mean: 

BE2014 - W2012R2 -> Exchange 2010 - E00027

Spiros_K_
Level 4
Certified

Enviroment :

 

  • Both, Exchange and BE Server are VM on the same VMWare Host.
  • Backup Strategy - direct using RAWS 
  • BE Server
    • BE2014
    • W2012R2
    • 16 GB Ram
    • TEMP - 2 TB free space
  • BE Global Options
    • Dedupe B2D 10 TB iSCSI NAS System
  • Backup Target
    • Exchange 2010 R3
    • W2008R2
    • 32GB RAM
  1. Exchange Job Options :
    1. GRT on,
    2. B2D Dedupe,
    3. Server-side dedupe,
    4. Catalogue after the job immed.
    5. AOFO off
  1. Backup Schema
    1. Full - GRT ON
    2. Inc. Daily - GRT ON
    3. Inc. Nightly - GRT ON
  • Problem
    • Full Backup will end successful and the catalogue job after it.
    • Incr. Backup will end successful but not the catalogue job after it. Error E00027
      • Final error: 0xe00002f7 - Cannot extract mailbox messages from the Exchange backup. Review the job log for more information. Final error category: Resource Errors
      • V-79-57344-759 - Unable to complete the operation for the following reason: VFF Open Failure. This can be caused by low memory or disk resources.
      • Backup break always after 118GB of data.
  • Tried solutions which didnt help
    • Antivurs off
    • Registry change : OnHostTemp
    • Restart
    • Updates
  • Next steps
    • SGMON full debug starts shortly

 

1 ACCEPTED SOLUTION

Accepted Solutions

Spiros_K_
Level 4
Certified

Last Sunday the DB of the Exchange goes offline and was not anymore able to get mounted. 

After 8 hours of looking and searching we achieve to mount the DB after we moved the DB to a new vHD. ( Exchange is a VM) 

After that we was able again to run Inc and Diff Backups with successful Catalog jobs. 

 

But the whole process created a new problem, in the meantime of looking I try a whole restore of the DB.
The Backup job of the DB ( ~700 GB ) is done after 2 hours and 20 Min. 
Job rate is arround ~5GB pro min.

 

The Restore job was running with 20-30 MB PRO Minute and that mean about 3-4 days to restore the whole DB. 
I wasnt able to take a closer look why it was so slow but any comment could lead me faster to the solution.

 

Exchange errors was : 3154 , 215 , 231, 1016,14035, 5000
and the error from the Exchange Consoel during the mount process was "I/O error bad disk" that triggert the idea to
move the DB to a new virtual hard disk and the problem was solved.

 

Now I have to find out why a restore wasnt possible..

 

I appreciate your hard work,

Regards
Spiros

 

View solution in original post

9 REPLIES 9

VJware
Level 6
Employee Accredited Certified

Where was OnHostTemp registry key created ? And were the backup jobs recreated after creating the registry key ?

Secondly, do ensure the VM itself is not being backed up when the Exchange Incremental runs.

Lastly, create these registry keys  -

1. Add the following registry key on the Exchange server(s):

Key : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VirtFile
Value: VFF Extended Timeout
Type: DWORD
Set value (Decimal) to 600.
Restart all the Backup Exec Services for the changes to take effect.

2. As backing up to disk, add the following registry key on the Backup Exec server :

Key : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\VirtFile
Value: Detach Timeout
Type: DWORD
Set value (Decimal) to 10000
Restart all the Backup Exec Services for the changes to take effect.

 

 

Spiros_K_
Level 4
Certified

Hi,

thanks for the fast response.

Media Server - > HKLM\Software\Symantec\Backup Exec For Windows\Backup Exec\Engine\Exchange

OnHostTemp REG_SZ 

No Jobs didnt recreated after Registry set but was able to see that this is working through SGMON.exe

Both Media Server and Exchange are VM on the same host. I am taking a backup using Agent and have direct the Exchange as Server in Media Server not through vCenter. 

I tried it today throught vCenter and the speed was from 4GB/Min down to 300MB/Min.

Going to take care of the changes that you suggested.

 

Regards,
Spiros

Spiros_K_
Level 4
Certified

Didnt help.. 

 

Still the same error during the Job also.. 

 

Set Detail Information - Catalog \\ex----\Mailbox Database 0900578071 
Set type               :
CatalogSet status             :
FailedSet description        : 
Resource name          : \\e----\Mailbox Database 0900578071
Logon account          : 
Error                  : e00002f7 - Cannot extract mailbox messages from the Exchange backup. Review the job log for more information.

 ----

Set Detail Information - Catalog \\ex----\ 
Set type               :
CatalogSet status             :
FailedSet description        : 
Resource name          : \\e----\
Logon account          : 
Error                  : e00002f7 - Cannot extract mailbox messages from the Exchange backup. Review the job log for more information.

---

Set Detail Information - Catalog \\e-----\Public Folders 
Set type               :
CatalogSet status             :
FailedSet description        : 
Resource name          : \\e---\Public Folders
Logon account          : 
Error                  : e00002f7 - Cannot extract mailbox messages from the Exchange backup. Review the job log for more information.

Start time             : Friday, October 23, 2015 4:43:36 PM
Media used             : IMG000925

 ---

 

Set Detail Information - Catalog \\e---\Archiv Datenbank 
Set type               : 
CatalogSet status      : 
FailedSet description  : 
Resource name          : \\ex----\Archiv Datenbank
Logon account          : 
Error                  : e00002f7 - Cannot extract mailbox messages from the Exchange backup. Review the job log for more information.
Start time             : Friday, October 23, 2015 4:36:54 PM
Media used             : IMG000923

 

Any idea?


Spiros

 

VJware
Level 6
Employee Accredited Certified

Do you have SGmon debug logs ? If yes, pls attach them or PM them. Alternatively, would recommend logging a support case so that an engineer can have a look @ your setup.

Spiros_K_
Level 4
Certified

Sure, I can attach the debug log. 

Please let me know what should I capture.

 

Regards
Spiros

VJware
Level 6
Employee Accredited Certified

Use this KB - https://www.veritas.com/support/en_US/article.TECH124453

Spiros_K_
Level 4
Certified

Unfortunately,

the logs inlcude all Mail flow and for security reason I am not able to send them out. 

Could you maybe explain me why we have successfuly Full Backup and Catalog jobs , successful Incremental Job but not the Catalog job after Incremental ?

 

Regards
Spiros

VJware
Level 6
Employee Accredited Certified

Without debugging, we wouldn't be able to understand why the failure occured.

Would recommend logging a formal support case instead so that an engineer can assist you further. Thanks.

Spiros_K_
Level 4
Certified

Last Sunday the DB of the Exchange goes offline and was not anymore able to get mounted. 

After 8 hours of looking and searching we achieve to mount the DB after we moved the DB to a new vHD. ( Exchange is a VM) 

After that we was able again to run Inc and Diff Backups with successful Catalog jobs. 

 

But the whole process created a new problem, in the meantime of looking I try a whole restore of the DB.
The Backup job of the DB ( ~700 GB ) is done after 2 hours and 20 Min. 
Job rate is arround ~5GB pro min.

 

The Restore job was running with 20-30 MB PRO Minute and that mean about 3-4 days to restore the whole DB. 
I wasnt able to take a closer look why it was so slow but any comment could lead me faster to the solution.

 

Exchange errors was : 3154 , 215 , 231, 1016,14035, 5000
and the error from the Exchange Consoel during the mount process was "I/O error bad disk" that triggert the idea to
move the DB to a new virtual hard disk and the problem was solved.

 

Now I have to find out why a restore wasnt possible..

 

I appreciate your hard work,

Regards
Spiros