Backup failure

[560802518]

Hi hope someone can help! i am running windows sbs 2003 fully updated with backupexec 10.0 with hot fixes - 2, 3, 5, 6



Job ended: 23 February 2005 at 01:30:47
Completed status: Failed
Final error: 0xe000fed1 - A failure occurred querying the Writer status.
Final error category: Resource Errors

Backup- Shadow?Copy?Components Shadow?Copy?ComponentsWriter Name: Windows Internet Name Service, Writer ID: {F08C1483-8407-4A26-8C26-6C267A629741}, Last error: 0x80042319, State: 0009. Consult your Microsoft documentation for details. Check the Windows Event Viewer for corresponding application or system errors.
V-79-57344-65233 - A failure occurred querying the Writer status.
Writer Name: WINS Jet Writer, Writer ID: {F08C1483-8407-4A26-8C26-6C267A629741}, Last error: 0x80042319, State: Failed during freeze operation (9). Consult your Microsoft documentation for details. Check the Windows Event Viewer for corresponding application or system errors.

[Sagar_Kamat_2]

To troubleshoot this error please do the following right after a backup completes. The reason that this command must be run shortly after a backup completes is that the writers will try to reset back to a stable state:

1. Open a Command Prompt on the server in question

2. Type "VSSADMIN LIST WRITERS" without the quotes

3. Read through the output and ensure that the writers are all showing a State of " Stable" and that Last Error is showing "No error."

4. If they are not then, reboot the server to try and reset the writers.

5. Once the writers are showing " Stable" use the native Windows backup utility to backup the Windows 2003 Server. After this completes run the VSSADMIN command again and compare to what was listed after the backup with Backup Exec.

You might find these documents helpful to resolve the problem:



http://support.veritas.com/docs/261993

Also refer Microsoft technote Q826936

Hope, this should resolve the issue.