03-02-2011 02:45 AM
Hi guys,
Can you please help me to find how i can check the selection list in backup exec and how i can change it if i want to do that also.
Many thanks,
Solved! Go to Solution.
03-02-2011 02:59 AM
In BE console, click on Job setup. At the bottom you will find all the selection lists.
You can open the selection list and then you make changes to it.
03-02-2011 02:59 AM
In BE console, click on Job setup. At the bottom you will find all the selection lists.
You can open the selection list and then you make changes to it.
03-02-2011 04:30 AM
Thanks u very much,I hope it would work:)
03-02-2011 04:36 AM
Yes it will work, if it doesn't do come back here.
03-02-2011 05:18 AM
Hi All,
I have a LTO 5 8096 tape library for tape backup purpose.
The scenario is like this: I have 2 data centres,Data center A and B. A is onsite and B is offsite just for backup purpose and almost 1 kilometer distance from B. I need to conect it through Fiber channel SAN switch and i have bought it.It is 8 GBits with SFP single mode.
How i can connect between two sites so that i can transfer almost 3TB data from site A to B every week as Full backup.I need step by step guide with configuration and Topology.I would be much thankful for all of You.
Many thanks in advance,
Best
03-02-2011 07:43 AM
Please start a new thread for this issue