07-17-2012 02:07 AM
Dear All
We have BE 2012,
OS 64 Bits, 16 Gb Ram and Xeon E5607 1 CPU 4 Socket.
We have Ibm librairy on Fiber channel with LTO 5 Drive.
The BAckup to disk is good, we have deduplication ratio to 1.5
When We do duplicate job from deduplication folder to tape we ave 500Mb/min.
It's very very slow
Is there some idea?
07-17-2012 02:37 AM
Hi,
The reason for this is because it is rehydrating all your data. So if you were backing up 100GB to a dedupe folder showing 50GB for instance, you'd then be backing up 100GB to tape.
During the rehydration process, it's going to reconstruct all that data again...no way to get around this. You can try tuning your tape drive as per pkh's article below though and see if this assist you in any way:
https://www-secure.symantec.com/connect/articles/tuning-my-lto4-tape-drive
Thanks!
07-17-2012 02:53 AM
Before modification
Block 64ko
Buffer 64 ko
Speed : 500Mo/min
After
Block at 256 Ko
Buffer 1 Mo
Speed : 3100 Mo/min
Greate.....Many thanks
07-17-2012 04:58 AM
After 100 GO to the tape, the rate comes down to 100 Mo/min...
07-17-2012 05:06 AM
...it's rehydrating, so let it run. You should be able to check the Job Log to see what data it is busy with.
07-17-2012 06:07 AM
I start the debug log, and wait 12 hrs for finish my 800Go duplicate job.
I will do Full backup every night, is the rehydrating let restart from scratch each day...or use the old rehydrating information knows ?
And juste another question
If I do Full & incremental backup on dedup disk, can i consolidate the full & Incr to the tape as like the ADBO Option with the synthetic backup or not ? when I duplicate the incremental, there is only the incremental data on the tape
07-17-2012 12:53 PM
Hi,
It will rehydrate all the data from scratch...not sure about the other question, but open up a new query on this and I am sure that someone with experience will assist you in this regard.
Thanks!
07-18-2012 05:21 AM
Hi,
Result of test.
This night Backup 2 dedup....Full backup, overage to 4000 Mo/min to the disk...
Duplicate to tape : 27 mo/min....(For remimber, FC to LTO5)
6Go Ram in use on the server ( off 16 Go)...Processor nearly 0%
Overhead on the SAN : SAS & FC standing for works.....
It's very poor result....
07-18-2012 05:28 AM
...what's the speed of a normal backup to tape? Where is your dedupe folder located? On the SAN or a local drive?
07-18-2012 05:50 AM
Normaly,
Between 2000 at 4000 Mo/min for backup to tape.
Regards.
I have restart BE, and rexecute the deduplication job, now is on 1000 at 4000 Mo/min...
Be change the tape who is used before, it's possible to have this problem because i have change the block size before, and test somes backup, and now with new block size ??maybe, maybe not ...
I think i am gonna be crazy...
07-18-2012 05:52 AM
Put the Block Size back to 64KB...there is always the chance that it messes with the data being backed up rendering your restores useless. The other thing: Is BE 2012 SP1a installed?
07-18-2012 06:58 AM
For the BE2012 I am full patched and liveupdated......
Since my last post the duplicat job still remain a 3100 Mo/min...
Actually the tape will be with Block at 256 ko, buffer at 1 Mo and number of buffer at 15.
I have 200 for 800 Go to put on tape, so i have activated the debug log and i still waiting for a finished job to have something to give to the support team.
Regards...