02-25-2015 06:09 AM
Hi
I have a Backup exec Server CASO 2014 SP2 it's a VM with Server 2012 R2
The managed Backup exec Server 2014 SP2 on Server 2012 R2 it's a physical server Ibm X3400 M3
I can't share the dedup storage of MBES with the Backup exec server CAS
02-25-2015 06:16 AM
...where are your catalogs located? Check the link below to understand catalog location in the CASO environment:
http://www.symantec.com/business/support/index?page=content&id=HOWTO23395
You might also be interested in the 2 links below relating to optimized dedupe:
http://www.symantec.com/business/support/index?page=content&id=HOWTO74447
Thanks!
02-25-2015 06:31 AM
catalogs are distributed
02-25-2015 08:20 AM
The Device & Media data should be kept on the CASO and not local to the MMS. What option was chosen while configuring the MMS ?
02-25-2015 08:25 AM
What are you call MMS?
02-25-2015 08:30 AM
MMS / MBES - Managed Media Server.
02-25-2015 09:56 AM
Parts attached called option
02-25-2015 10:00 AM
...CASO is not licensed. You need to license this (paid for), then run the CASO wizard to create a CASO server out of 1 of them...then set up Optimized Dedupe as per the docs I sent through.
Thanks!
02-25-2015 10:04 AM
I made another VM wtih Server 2012 SP2 and backup exec 2014 SP2
I can share dedup storage between the CAS and this MMS
so i will desinstall/install Backup exec on my first MMS( server physical)
02-25-2015 10:08 AM
the screenshot show option of the Managed Backup Exec server
02-25-2015 05:49 PM
The Managed Server option is part of the base BE. It does not need a seperate licence, but it is useless unless you have a CAS. To define a CAS, you need to purchase and install an ESO licence on one of the media server and then define it as a CAS.
02-26-2015 05:17 AM
On the mms I unchecked the option Agent Vmare and on the CASO I can share the dedup storage.
In the job i added a step duplication to the storage shared but the job stay queued since yesterday
02-26-2015 06:05 AM
check to see if there are any pending Alerts and respond to them.
Thanks!
02-27-2015 06:11 AM
Hi
I started on new virtual machine and i uninstall Backup exec on the physical server.
So I have
Bkp21005: VM with Server 2012 R2, Backup Exec 2014 SP2 with CAS and no storage
Bkp21004: VM with Server 2012 R2, Managed Backup Exec 2014 SP2 and dedupe storage
Bkp21003:Physical Server with Server 2102 R2, Managed Backup Exec 2014 SP2 and dedupe storage
I would Bkp21004 backup data on his dedupe storage and duplicate this backup on storage Bkp21003
To do that you have to share dedup storage Bkp21003 with Bkp21004 but it does not work
02-28-2015 12:18 PM
now when i try to share dedup storage Bkp21003's with Bkp21004 I obtain 'no Backup Exec Deduplication Option licence is installed on Bkp21004'
02-28-2015 12:20 PM
on Bkp21004 deduplication option is installed
02-28-2015 01:04 PM
...where are your catalogs located? Centrally on the CASO, or distributed on the MMS?
02-28-2015 01:47 PM
distributed on the MMS
03-02-2015 11:01 AM
Finally I can share dedup storage Bkp21003 with Bkp21004 Server and on Bkp21004 i made a job who does Deduplication to dedup storage Bkp21004's and Optimized Duplication to dedup storage Bkp21003's but after verify backup dedup it made another deduplication.
the job stay active and when i closed and open again the console, backup exec crash and show whitout stop "Connect to localhost"
03-05-2015 10:35 AM
I will erase all server(Bkp21003, Bkp21004, Bkp21005).
Is it possible to uninstall Backup exec without losing backup sets and use them on the new backup exec ?
Thanks