cancel
Showing results for 
Search instead for 
Did you mean: 

Help, backup exec agent will not install (push or manual)

ettexor1
Level 3

Hello, I am trying to install backup exec agent to enable backups of some domain controllers but the install will not work.  I have tried Push method which shows as successful but Backup Exec will not establish connection or Trust with the server (Backup Exec tried connecting to the server xxx unsuccessfully.  You must connect to the server manually..."

Manual install method also fails, running setup.exe from the Rawx64 directory (copied to local servers) and then running setup.exe /RAWSX64: /S: /ADVRT:<backup exec server name>

It fails almost right away, here is log:

Symantec Backup Exec (TM) 2014 Agent for Windows Installation Log

01-17-2017,07:12:16 : Windows Operating System Version: 6.0 - Domain Controller

01-17-2017,07:12:16 : GetProductInfo returned success. Checking for CORE OS values.

01-17-2017,07:12:16 : Checking Windows Installer Version.

01-17-2017,07:12:16 : Windows Installer Version: 4.5.6002.19424

01-17-2017,07:12:16 : Executing managed _Setup:

01-17-2017,07:12:16 : C:\Temp\RAWSX64\install\_Setup.exe

01-17-2017,07:12:17 : Loading XML from:

01-17-2017,07:12:17 : C:\Temp\RAWSX64\install\IFProducts.xml

01-17-2017,07:12:17 : ArgsDataParser::InitDictionary

01-17-2017,07:12:17 : AgentSeqDlgs::RawsDlgSequence

01-17-2017,07:12:17 : Set RAWS Media path: C:\Temp\RAWSX64\install\media\

01-17-2017,07:12:17 : RawsDlgSequence::CheckInstMode

01-17-2017,07:12:17 : BEOperations::BE_GetInstalledProdCodeVersion()

01-17-2017,07:12:17 : The product detected. PID: , version: .

01-17-2017,07:12:17 : RawsDlgSequence::ValidateCmdLine.

01-17-2017,07:12:17 : Starting initialization of install data.

01-17-2017,07:12:17 : Completed initialization of install data.

01-17-2017,07:12:17 : BEOperations::BE_GetInstalledProdCodeVersion()

01-17-2017,07:12:17 : The product detected. PID: , version: .

01-17-2017,07:12:17 : BEOperations::BE_GetInstalledProdCodeVersion()

01-17-2017,07:12:17 : The product detected. PID: , version: .

01-17-2017,07:12:17 : Terminal Services enabled.

01-17-2017,07:12:17 : Terminal Services server has been set to Install mode.

01-17-2017,07:12:17 : Launching Silent Install

01-17-2017,07:12:17 : Running in Installation mode

01-17-2017,07:12:17 : AgentSeqDlgs::ADlgWelcome

01-17-2017,07:12:17 : AgentSeqDlgs::ADlgInstallType

01-17-2017,07:12:17 : RawsDlgSequence::CheckInstalledProducts

01-17-2017,07:12:17 : BEOperations::BE_GetInstalledProdCodeVersion()

01-17-2017,07:12:17 : The product detected. PID: , version: .

01-17-2017,07:12:17 : BEOperations::BE_GetInstalledProdCodeVersion()

01-17-2017,07:12:17 : The product detected. PID: , version: .

01-17-2017,07:12:17 : AgentSeqDlgs::DlgChooseCustom

01-17-2017,07:12:17 : AgentSeqDlgs::AdlgInstallComplete

01-17-2017,07:12:17 : AgentSeqDlgs::Misc_BE_CommonOps

01-17-2017,07:12:17 : Telemetry Switch setting : True

01-17-2017,07:12:17 : Local Install Agent

01-17-2017,07:12:17 : INFO -2146233087: Unable to determine if Windows Deduplication volume.

01-17-2017,07:12:17 : AgentSeqDlgs::AgentInstaller

01-17-2017,07:12:17 : Starting Install

01-17-2017,07:12:18 : WARNING: Failed to copy .MST file to MSI cached folder.

01-17-2017,07:12:18 : In GetVMWareGuest().

01-17-2017,07:12:18 : bISVMGuest: False

01-17-2017,07:12:18 : RAWS MSI Command Line: EXE_ENVOKED=1 ALLUSERS=1 REBOOT=ReallySuppress INSTALLDIR="C:\Program Files\Symantec\Backup Exec\RAWS" INSTALLLEVEL=200 ADDLOCAL=ALL TRANSFORMS="C:\ProgramData\Symantec\Backup Exec\{856D9205-4AA3-48FB-ADD2-CE6EFF23ED9E}\1033.MST" RAWSADVRTISENAMELIST=xxxxxxx ENABLEADVRT=1 PATCH="C:\Temp\RAWSX64\Updates\RAWSx641786RHF218257.msp;" REINSTALLMODE=emus VMWAREGUEST = 0 INSTALLUIMODE=0

01-17-2017,07:12:18 : Running Install Mode

01-17-2017,07:12:18 : In silent mode so not starting Install Progress Thread.

01-17-2017,07:12:18 : AgentInstaller::Install_Product_Thread

01-17-2017,07:12:18 : Launching MSI: C:\Temp\RAWSX64\install\media\Symantec Backup Exec Remote Agent for Windows Systems.msi

01-17-2017,07:12:18 : Discovered Total Actions: 0

01-17-2017,07:12:18 : The return code from the MSI is: 2

01-17-2017,07:12:18 : AgentSeqDlgs::PostInstallActions

01-17-2017,07:12:18 : AgentSeqDlgs::Misc_BE_CommonOps

01-17-2017,07:12:19 : The return value for Symantec Backup Exec Agent for Windows returned error code: 2

01-17-2017,07:12:19 : Clean up Symantec installer keys.

01-17-2017,07:12:19 : AgentSeqDlgs::Misc_BE_CommonOps

01-17-2017,07:12:19 : Dialog Sequence Returning errorlevel 2

+ 01-17-2017,07:12:19 : The Installation Failed!

01-17-2017,07:12:19 : The return code is: 2

+ 01-17-2017,07:12:19 : ERROR: Installation failed with error 2. GetLastError = :0

Even running install manually (setup.exe on its own) produces same error...

9 REPLIES 9

pkh
Moderator
Moderator
   VIP    Certified

01-17-2017,07:12:17 : Terminal Services enabled.

You have Terminal Services enabled which is why your installation failed.

You need to either disable Terminal Services or install the remote agent locally using the procedure to install programs when Terminal Services are enabled.

Hi, yes I did read somewhere that this could cause a problem and to try mstsc.exe /console instead, which I did but still fails...

pkh
Moderator
Moderator
   VIP    Certified

This is not the correct method.

Do some research and use the proper method.

I've done lots of research, I couldn't find much info about this...I also was unable to find any info about this error in the install guides.

I have a local site contact who can log onto the physical server and try the install, but this won't help me with the other servers in other sites/countries...

We also do not have ILO available...

Is there a reason the Push method fails?  There is no firewall rule or port blocking done that I'm aware of...

I thought I would also note that this server (and all the other ones I'm trying to add) have Commvault comcell installed, some of their data is being backed up over the WAN by commvault, but its very slow, hence why I want to try backup the local C: and registry using Backup Exec.  I tried stopping the commvault services before the install but it still fails with the same error...

Is it possible Commvault agent and the Backup Exec agent can not co-exist?

Have now had someone do it physically on the server and it still fails:

Symantec Backup Exec (TM) 2014 Agent for Windows Installation Log


01-18-2017,09:34:51 : Windows Operating System Version: 6.0 - Domain Controller

01-18-2017,09:34:51 : GetProductInfo returned success. Checking for CORE OS values.

01-18-2017,09:34:51 : Checking Windows Installer Version.

01-18-2017,09:34:51 : Windows Installer Version: 4.5.6002.19712

01-18-2017,09:34:51 : Executing managed _Setup:

01-18-2017,09:34:51 : C:\Temp\RAWSX64\install\_Setup.exe

01-18-2017,09:34:51 : Loading XML from:

01-18-2017,09:34:51 : C:\Temp\RAWSX64\install\IFProducts.xml

01-18-2017,09:34:51 : ArgsDataParser::InitDictionary

01-18-2017,09:34:51 : AgentSeqDlgs::RawsDlgSequence

01-18-2017,09:34:51 : Set RAWS Media path: C:\Temp\RAWSX64\install\media\

01-18-2017,09:34:51 : RawsDlgSequence::CheckInstMode

01-18-2017,09:34:51 : BEOperations::BE_GetInstalledProdCodeVersion()

01-18-2017,09:34:51 : The product detected. PID: , version: .

01-18-2017,09:34:51 : RawsDlgSequence::ValidateCmdLine.

01-18-2017,09:34:52 : Starting initialization of install data.

01-18-2017,09:34:52 : Completed initialization of install data.

01-18-2017,09:34:52 : BEOperations::BE_GetInstalledProdCodeVersion()

01-18-2017,09:34:52 : The product detected. PID: , version: .

01-18-2017,09:34:52 : BEOperations::BE_GetInstalledProdCodeVersion()

01-18-2017,09:34:52 : The product detected. PID: , version: .

01-18-2017,09:34:52 : Terminal Services enabled.

01-18-2017,09:34:52 : Terminal Services server has been set to Install mode.

01-18-2017,09:34:52 : Launching Silent Install

01-18-2017,09:34:52 : Running in Installation mode

01-18-2017,09:34:52 : AgentSeqDlgs::ADlgWelcome

01-18-2017,09:34:52 : AgentSeqDlgs::ADlgInstallType

01-18-2017,09:34:52 : RawsDlgSequence::CheckInstalledProducts

01-18-2017,09:34:52 : BEOperations::BE_GetInstalledProdCodeVersion()

01-18-2017,09:34:52 : The product detected. PID: , version: .

01-18-2017,09:34:52 : BEOperations::BE_GetInstalledProdCodeVersion()

01-18-2017,09:34:52 : The product detected. PID: , version: .

01-18-2017,09:34:52 : AgentSeqDlgs::DlgChooseCustom

01-18-2017,09:34:52 : AgentSeqDlgs::AdlgInstallComplete

01-18-2017,09:34:52 : AgentSeqDlgs::Misc_BE_CommonOps

01-18-2017,09:34:52 : Telemetry Switch setting : True

01-18-2017,09:34:52 : Local Install Agent

01-18-2017,09:34:52 : INFO -2146233087: Unable to determine if Windows Deduplication volume.

01-18-2017,09:34:52 : AgentSeqDlgs::AgentInstaller

01-18-2017,09:34:52 : Starting Install

01-18-2017,09:34:52 : WARNING: Failed to copy .MST file to MSI cached folder.

01-18-2017,09:34:52 : In GetVMWareGuest().

01-18-2017,09:34:52 : bISVMGuest: False

01-18-2017,09:34:52 : RAWS MSI Command Line: EXE_ENVOKED=1 ALLUSERS=1 REBOOT=ReallySuppress INSTALLDIR="C:\Program Files\Symantec\Backup Exec\RAWS" INSTALLLEVEL=200 ADDLOCAL=ALL TRANSFORMS="C:\ProgramData\Symantec\Backup Exec\{856D9205-4AA3-48FB-ADD2-CE6EFF23ED9E}\1033.MST" RAWSADVRTISENAMELIST=sha-svr01.asia.zespri.zil ENABLEADVRT=1 PATCH="C:\Temp\RAWSX64\Updates\RAWSx641786RHF218257.msp;" REINSTALLMODE=emus VMWAREGUEST = 0 INSTALLUIMODE=0

01-18-2017,09:34:52 : Running Install Mode

01-18-2017,09:34:52 : In silent mode so not starting Install Progress Thread.

01-18-2017,09:34:52 : AgentInstaller::Install_Product_Thread

01-18-2017,09:34:52 : Launching MSI: C:\Temp\RAWSX64\install\media\Symantec Backup Exec Remote Agent for Windows Systems.msi

01-18-2017,09:34:52 : Discovered Total Actions: 0

01-18-2017,09:34:52 : The return code from the MSI is: 2

01-18-2017,09:34:52 : AgentSeqDlgs::PostInstallActions

01-18-2017,09:34:52 : AgentSeqDlgs::Misc_BE_CommonOps

01-18-2017,09:34:53 : The return value for Symantec Backup Exec Agent for Windows returned error code: 2

01-18-2017,09:34:53 : Clean up Symantec installer keys.

01-18-2017,09:34:53 : AgentSeqDlgs::Misc_BE_CommonOps

01-18-2017,09:34:53 : Dialog Sequence Returning errorlevel 2

+ 01-18-2017,09:34:53 : The Installation Failed!

01-18-2017,09:34:53 : The return code is: 2

+ 01-18-2017,09:34:53 : ERROR: Installation failed with error 2. GetLastError = :0

 

I looked at another VOX post from a few years ago with this error. On that remote machine, see if the Agent is in uninstall. If it';s not there, check for it in Program files and in the registry under \HKLMOLM\Software\Symantec\Backup Exec

You may need to manually clean it up.

I can't find any Symantec folder in c:\program files but I can see a few registry keys under HKLM\software\symantec\backup exec for windows...

I will try deleting this key and re-try the install...

You can close this forum post, I ended up just using Commvault to backup the registry.  I have to say the support here was pretty awful, I doubt I will be coming back here again...