01-14-2015 10:50 AM
Hi,
I have created a media set and would like to edit the AP and OPP for the same. could you please help me with the navigation on how to do that ?
Thanks,
Solved! Go to Solution.
01-14-2015 01:34 PM
I seem to recall a similar issue. Update to SP2 and see if it helps. If not, would recommend to log a support case and as a workaround, you should be able to edit the media set properties via BEMCLI.
01-14-2015 12:04 PM
Hi suren,
Check below and see if this is relevant or not:
http://www.symantec.com/business/support/index?page=content&id=HOWTO99462
THanks!
01-14-2015 12:30 PM
Thanks for the quick reply CraigV.
I didn't find "All Media Sets" tab in the storage section. Attaching the screenshot of the same.
Thanks
01-14-2015 01:34 PM
I seem to recall a similar issue. Update to SP2 and see if it helps. If not, would recommend to log a support case and as a workaround, you should be able to edit the media set properties via BEMCLI.
01-14-2015 01:37 PM
...check the Offline Tape Media and Backup2Disk and see if they aren't there...