cancel
Showing results for 
Search instead for 
Did you mean: 

Inventory Now

SURA
Level 4

What happens when we give inventory in BE 2014

How to check it gets over 

1 ACCEPTED SOLUTION

Accepted Solutions

VJware
Level 6
Employee Accredited Certified

Click on The Storage tab and then double-click on the storage device which was inventoried. On the left pane, you can check "Job History" and check if Inventory was completed or not. If not, it will be still running with an active status under "Jobs"

There is no notification by default. When you setup the inventory, you can choose to enable notification or not.

View solution in original post

5 REPLIES 5

CraigV
Moderator
Moderator
Partner    VIP    Accredited

Hi,

 

It's going to run a scan of the backup media (either B2D or tape) and check what that media is. it will show the media set it belongs too, media name etc.

You can set up a notification to let you know once done, or just log onto the server and see if it has completed.

Thanks!

SURA
Level 4

will it show the scan process can we seen them

there is no notification 

how to see then whether it is completed or not

VJware
Level 6
Employee Accredited Certified

Click on The Storage tab and then double-click on the storage device which was inventoried. On the left pane, you can check "Job History" and check if Inventory was completed or not. If not, it will be still running with an active status under "Jobs"

There is no notification by default. When you setup the inventory, you can choose to enable notification or not.

CraigV
Moderator
Moderator
Partner    VIP    Accredited

...there will be a % count up to 100%, after which the job stops.

Check below on how to manually set alerts in BE 2014:

http://www.symantec.com/business/support/index?page=content&id=HOWTO98997

SURA
Level 4

Thank you