Highlighted

New Tape not being seen in Drive

Hi Guys,

When I put a new tape in to a single Quantum tape drive it is not being seen. If I put a used tape in it is still not being seen.

If I restart the BE 2012 services the tapes are being seen.

I have even tried a inventory but it doesn't work as it says there is no media inserted.

I have another server with a Quantum drive that I don't have an issue with this.

How do I get this tape drive to see media when it is inserted?

John.

1 Solution

Accepted Solutions
Highlighted
Accepted Solution!

Hi 1 First of all BE 2012

Hi

1 First of all BE 2012 should be on sp1a with 3 updates so check again what updates you have installed for same
2 To install latest symantec drivers please check link below

http://www.symantec.com/docs/TECH17931

3 Once done do a power cycle but powering off the server and library & then power on the rape drive first and wait for it to intialize and then power on the media server finally

 

Thanks

View solution in original post

8 Replies
Highlighted

Hi Please ensure BE 2012 is

Hi

Please ensure BE 2012 is fully patched with sp1a and other updates , in device manager ensure tape drive is using latest symantec drivers

If all this is set up then use the h/w tool for the tape drive having issue and try to see from there if you are able to scan and perform read or write operation

 

Thanks

Highlighted

Hi Sameer, The tape drive is

Hi Sameer,

The tape drive is using the Quantum tape driver, how do I get the Symantec one?

 

I have Version 14 Rec 1798 installed. Checked Live UPdate and no updates available.

John.

 

 

Highlighted
Accepted Solution!

Hi 1 First of all BE 2012

Hi

1 First of all BE 2012 should be on sp1a with 3 updates so check again what updates you have installed for same
2 To install latest symantec drivers please check link below

http://www.symantec.com/docs/TECH17931

3 Once done do a power cycle but powering off the server and library & then power on the rape drive first and wait for it to intialize and then power on the media server finally

 

Thanks

View solution in original post

Highlighted

I have installed the Symantec

I have installed the Symantec tape driver, I am now verifying the SP1a and the the three updates.

The driver install requires a restart which I will do tonight.

John.

Highlighted

OK I am now getting

OK I am now getting closer.

 

Now when I put in a tape I just do an inventory but surely it should automatically pick up new tapes inserted.

Highlighted

Hi   Not sure what you want

Hi

 

Not sure what you want to say ,but yes whenever put a new tape in do inventory for BE

 

Thanks

Highlighted

In my other server I don't

In my other server I don't have to do that it auto recognises a new tape!!!

Highlighted

If you are using barcode

If you are using barcode labels and you import a tape, you don't need to do any inventory.